Specifications

command
51
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
IR SYSTEMS
IR EMITTERS
ELAN industry-standard IR Emitters can be used with any infrared transmission system
on the market. All three models feature an IR-transparent housing that allows infrared
from hand-held remotes to pass through to a source component’s IR window, allowing
for in-room, as well as system control, of every source. ELAN IR Emitters pack out with
extra, pre-cut adhesive backings and an IR shield that prevents stray IR commands
directed at other sources from interfering source control – ideal for use in enclosed
cabinetry.
The standard emitter for most
source-control applications. Sold
in packages of six.
IR2040
MINIATURE IR EMITTER
FEATURES & SPECS
Small, discrete appearance
IR-transparent housing
Black finish blends with most source
equipment
10-foot-long cable
Standard 3.5mm mini plug
Includes IR blocking shield
Each model available in packs of 6
Designed specifically for
controlling one source from
two controllers. Sold in packages
of six.
IR2041
DUAL PLUG MINIATURE
IR EMITTER
Perfect for ELAN IR ‘ALL’ port
applications where two
sources need to be controlled
from the same IR output port.
Sold in packages of six.
IR2042
DUAL MINIATURE IR
EMITTERS WITH
SINGLE PLUG
Available in two-meter lengths,
the IR2043 is used for IR
connections between ELAN multi-
room controller IR ‘ALL’ ports and
any component that has a 3.5mm
IR input jack. Ideal for use with
the ELAN Z•880 Video Controller,
VIA!
®
dj Digital Music Server and
the DTNR Dual Digital Tuner. Also
perfect for routing the Trigger
outputs of ELAN multi-room
controllers to ELAN amplifiers,
Z•Fans and the Z•Power Controller.
Sold in packages of six.
IR2043
3.5mm to 3.5mm MINI
PLUG INTERCONNECT
CABLE
Receiver-based audio systems are now even
more affordable and easier to install with
the IRZ.
This single-gang Decora
®
-styled connecting
block can power up to 12 Z•PADs or
IRC3000 receivers, creating a four-zone IR
repeater system with three sub-zones each.
The zoned routing accommodates multiple
same-model receivers without IR cross talk.
The IRZ can also be used as a 1 x 6
powered IR distribution block.
The two ‘ALL’ ports can control the
common sources in the system.
Available White Decora
®
only.
IRZ IR CONNECTING BLOCK w/ ZONING CAPABILITY
FEATURES & SPECS
4 zone IR emitter output ports
2 IR ‘ALL’ ports to control common
source equipment
100kHz IR Passthrough bandwidth
Can power up to 12 Z•PADS with no
Z•025 Relay boards (3 Z•PADs per zone)
Powers up to 6 Z•PADS with Z•025
Relay boards (2 Z•PADs per zone)
Installer–friendly receiver power
status and IR activity indicators
11VAC Power Supply included
IR_FINAL.qxd 1/24/05 4:44 PM Page 51