Specifications

power
Z300 TWO-CHANNEL POWER AMPLIFIER
FEATURES & SPECS
Output Power:
• 2 x 150 WRMS @ 2 Ohms per channel
• 2 x 100 WRMS @ 4 Ohms per channel
• 2 x 60 WRMS @ 8 Ohms per channel
The perfect amplifier for high-power,
multi-speaker listening areas
Buffered line level outputs
Remote trigger IN/OUT
SPECIFICATIONS:
Voltage Gain (Av): ..........................0 to 28,
Front Panel adjustable
Frequency Response: ..20Hz to 20kHz -.5dB
Full Power Bandwidth: ........5Hz to 30kHz
Signal to Noise: ......> 110dB (A-weighted)
Channel Separation: ..........>-70dB @ 1kHz
THD: ..............................................< 0.03%
Intermodulation Distortion: ..........< -90dB
Input Impedance:........................33k Ohms
Input Sensitivity: ............0dBu (.707 VRMS)
Remote Trigger Input: ..........5-24V AC/DC
Power Requirements: ........120VAC, 440W
Dimensions:
Z•300: ............17" W x 2-1/4" H x 11" D
432mm W x 58mm H x 280mm D
Z•301: ............19" W x 1-3/4" H x 11" D
483mm W x 45mm H x 280mm D
Weight: ................................13.6 lbs/6.2 kg
ETL
®
listed and CE approved
Whether you specify the Z•300 in a home
theater application or in a distributed
audio system, this single rack-height amp
provides enough power to handle the
most inefficient freestanding speakers or
a whole house full of in-walls.
The Z•300 amplifier will deliver 300 watts
of power into 2-Ohm loads. This high-
current, low-impedance design eliminates
the need for speaker selector boxes or
load protection devices when driving up
to four pair of 8-Ohm speakers. The ultra-
high-efficiency toroidal transformer and
40,000uF bulk storage capacitance ensures
that peak current demands are always
met. This translates into exceptionally
tight bass response and improved dynamic
headroom.
Buffered loop outputs allow routing of
the stereo inputs to an additional power
amplifier or surround sound processor
without signal loss or degradation.
Three pairs of gold-plated, five-way
speaker binding posts make it easy to
connect multiple speakers. The remote
trigger input mutes the amplifier when
the preamp is turned off. Gain pots for
each channel are accessible via the front
panel.
25
©2004 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
AMPLIFIERS
(Also Available in 19” Rack Mount Version, Model Z301)
Am_FINAL.qxd 1/24/05 3:51 PM Page 25