Specifications

©2012 ELAN HOME SYSTEMS • PETALUMA, CA USA • ALL RIGHTS RESERVED


CVRM COMPONENT VIDEO RECEIVE PLATE
SPECIFICATIONS
Input Imp.. . . . . . . . . 50 Ohms, (4.0V max)
Output Imp . . . 75 Ohms, 1V pk-pk (3.5V max)
Bandwidth: . . . . . 150MHz (125MHz@500 ft.)
THD . . . . . . . . . . . . . . . . . . . .-50dBc
Network Gain . . . . . . . . . . . . . . . . .1.0
Power. . . . . . . . . . . Supplied by Send Plate
Style . . . . . . . . . .White Decora
®
-style only
ORDER NO. CVRP
For use with the V85
Component Video Controller,
the CVRM provides an easy,
loss-free way to terminate
Cat-5 wire runs on the
back side and a component
video cable on the front. DIP
switches allow you to adjust
the video gain level and
contrast based on the length
of the Cat-5 wire run.
 FEATURES
For use with V85 Component Video Controller
 Easy connection of Cat-5 video wire run
& component video cable
 DIP-switch configurable for different wire
run lengths
 Single-gang, Decora
®
-styling
 Available in White
AUDIO/VIDEO WALL PLATES
CVWP COMPONENT VIDEO WALL PLATE KIT
SPECIFICATIONS
Send Plate
Input Imp. . . 75 Ohms, 1V pk-pk (3.4V max)
Output Imp. . . . . . . . . . . . . . 50 Ohms
Bandwidth . . . . . . . . . . . 450MHz (-3dB)
Channel Separation . . . . . . . . . . . 90dB
Power . . . . . . . . . . . 16VDC, 1.5A (incl.)
Receive Plate
Input Imp. . . . . . . . . 50 Ohms, (4.0V max)
Output Imp. . . 75 Ohms, 1V pk-pk (3.5V max)
Bandwidth:. . . . 150MHz (125MHz@500 ft.)
THD . . . . . . . . . . . . . . . . . . -50dBc
Network Gain . . . . . . . . . . . . . . . 1.0
Power. . . . . . . . . . Supplied by Send Plate
Style . . . . . . . . . . .White Decora
®
-style only
ORDER NO. CVWP
The Component Video Wall Plate (CVWP) Kit
extends high –and standard– definition com-
ponent video wire runs up to 500 ft. over Cat-5
cable. The CVWP can be used in any system that
requires component video signals be sent over
long distances.
The CVWP can also be used to distribute local
component video sources, such as DVD players
and satellite receivers, back to the head end for
house-wide distribution through video switchers.
The CVWP Kit consists of 2 single-gang, Decora®-
style wall plates: a SEND plate and a RECEIVE
plate. DIP switches on the RECEIVE plate adjust
the video gain level and contrast based on wire run
length. Both plates also have F-to-F barrel connec-
tors for routing digital audio over coaxial cable.
 FEATURES
Send component video signals up to 500 ft.
w / o signal loss using Cat-5 cable
 Ideal for S128P component video distribution
 DIP-switch configurable for different wire run
lengths
 Digital coax audio connectors
 Single-gang, Decora
®
-styling