Specifications

ManualsBrandsElan ManualsComputer equipmentTS7





This great little package enables you to initially set up your lighting

system and allow you to control 4 lighting zones in main areas in

your home.

The keypads and wall switches are pre-programmed with 4 basic

scenes. Spending less time on programming will allow you to start

enjoying your ELAN Lighting system sooner. Changing the existing

scenes are as simple as activating the scene, changing the lighting

levels at the wall switches and tapping the scene button on the

keypad five times. The Keypads can also receive IR commands to

give you control from any learning remote.

KIT INCLUDES

(4) WS1D6W

(1) KPCW6W

(1) PIMR

(1) PPC1

4-ZONE STARTER KIT

The Timed Event Controller is a high quality plug-in

home automation controller capable of transmitting

and receiving digital commands over the existing

powerlines at preset times.

The TEC stores up to 20 individual timed events.

Each event can be configured to occur, daily,

during the work week, on weekends, on specific

days of the week or on a specific day of the year.

Event times can be specified as absolute times or

relative to sunrise or sunset times (based on your

geographic location). A Security Mode to randomly

vary the event time each day within a user specified

time window gives the home a lived in look.

TIMED EVENT CONTROLLER

TIMED EVENT CONTROLLER ORDER NO. TEC

FEATURES

 Stores up to 20 individual times events

 Security mode allows for random events

 Automatic Daylight Savings adjustment

 10-year batteryback-up

The Input Control Module is a high quality plug-in

home automation controller device designed to

interface off-the-shelf low voltage or contact

closure sensor devices. It provides two indepen-

dent channels of general purpose isolated contact

closure sensing inputs to activate single lights,

trigger dramatic scenes, or send messages to a

central controller.

INPUT CONTROL MODULE

INPUT CONTROL MODULE ORDER NO. ICM

FEATURES

 Quick and easy installation: simply plug the ICM

into any standard wall outlet and wire the device

to the sensor.

 Perfect for interfacing off-the-shelf motion

sensors, light sensors, occupancy sensors,

pressure mats, RF remote controls, etc

INSTALLATION & SUPPORT DEVICES continued

4 -ZONE STARTER KIT ORDER NO. SPK4