Specifications
©2012 ELAN HOME SYSTEMS • PETALUMA, CA USA • ALL RIGHTS RESERVED
DIMMERS & SWITCHES
These dimmers replace existing switches or
dimmers providing controlled lighting without new
wires. The dimmers are compatible with incandes-
cent, dimmable CFL, inductive and magnetic low
voltage loads. Configured as a switch this device
will switch standard fluorescent, electronic low
voltage and relay loads. Available in wattages up
to 2400 watts, our dimmers are one of the very
few to dim over 1000 watts without an external
interface. Each device can be a member of 16
scenes and act as a simple two button controller.
FEATURES
Each unit can be a wdimmer, a relay switch
or a two- button transmitter depending on its
programming.
May be used for stand-alone scene lighting
control, or with a controller
Pre-programmed with 7 preset scenes
Variable fade rates for rocker switch operation
and all scenes can be set between instant–on and
one hour
STANDARD DIMMERS
USE ORDER NO. PLUS COLOR CODE
INDUCTIVE LOAD DIMMERS
ORDER NO WS1DL6/10/15/24
CFL/LED LOAD DIMMERS
ORDER NO WS1DL6/10/15/24
ELECTRONIC LV LOAD DIMMERS 300W
ORDER NO WS1E3
ELECTRONIC LV LOAD DIMMERS 500W
ORDER NO WS1E5
LAMP & APPLIANCE MODULES
LAMP MODULE, 400WORDER NO. LM14
APPLIANCE MODULE, 12A ORDER NO. AM112
The Lamp and Appliance Modules are perfect for
remotely controlling one or more plug-in lamps and
appliances. Simply plug the item to be controlled
into the controlled outlet on the bottom of the
module and then plug the module in the wall. A
pass-through outlet allows plugging in other items
that do not require remote control.
The LM14 Lamp Module is designed for controlling
incandescent, fluorescent or magnetic low voltage
loads, and provides as much as 400W of power
to the lamp(s). The dimmer function can also be
disabled, turning the outlets into a switch, allowing
on/off commands to non-dimmable loads such as
fans or radios. The AM112 Appliance Module will
handle up to 12 Amps for ON/OFF control.
The FMD24 2-Channel Fixture Module Dimmer is
the ideal solution to controlling incandescent lights
or fixtures that need to be individually controlled or
are not currently wired to a dedicated wall switch
location.
The FMR120 ideal solution for fluorescent lights,
or other non-dimming loads (such as motors or
transformers), that need to be individually
controlled but are not currently wired to a
dedicated wall switch location.
FIXTURE MODULES
FIXTURE MODULE DIMMER ORDER NO. FMD24
FIXTURE RELAY MODULE, 20A ORDER NO. FMR120
FEATURES
Auto-off timer and transmit function allows the
unit to turn off after a pre-set time from 1 minute
to 4 hours from being turned on
Switch trigger circuits allow the modules to turn
on when the controlled device’s on/off switch
is opened and then closed and can update its
status to other devices – great feature for read-
ing lamps when you don’t want to have to find a
controller to turn the lamp on
Transmission mode allows the modules to trigger
scenes when they are manually turned on or
upon the Auto-off time-out setting
Pre-programmed with 7 preset scenes to create
inviting moods and a flash feature for notification
Programmable on-level with 100 Dimming Steps
for elegant scene membership and notification
of status
Auto off timer allows the unit to turn off after a
pre-set time from 1 minute to 4 hours
Multi-colored LED to show status of load
May be used in three-way circuits just add an
RWS Remote Wall Switch
Electronic Low Voltage (ELV)dimmers are com-
patible with and required for ELV transformers
Adjustable Receive Sensitivity to maximize
communication reliability
Available in White (W), Ivory (I), Almond (A),
Light Almond (LA), and Black (B)
FEATURES
Wires into electrical box or fixture canopy
Controllable by an ELAN lighting controller
Allows automation of ceiling fan / light locations
A
B
I
W
LA