Specifications

©2012 ELAN HOME SYSTEMS • PETALUMA, CA USA • ALL RIGHTS RESERVED


SPECIFICATIONS
Power Output (RMS) per channel 150W @ 2 ohms
. . . . . . . . . . . . . . . . . 100 W @ 4 ohms
. . . . . . . . . . . . . . . . . . 60W at 8 ohms
Frequency Response. . . . . 20Hz to 20kHz -.5dB
Full Power Bandwidth . . . . . . . . 5Hz to 30kHz
Signal to Noise . . . . . . . >110dB (A-weighted)
Channel Separation . . . . . . . . >70dB @ 1kHz
THD . . . . . . . . . . . . . . . . . . . < 0.03%
Intermodulation Distortion. . . . . . . . .< -90dB
Voltage Gain (Av) . 0 to 28, front panel adjustable
Input Impedance . . . . . . . . . . . .33k Ohms
Remote Trigger Input . . . . . . . 5-24V AC / DC
Trigger Loop Output. . . . . . . +12VDC @ 0.1A
AC Power Requirements. . . . . . 120VAC, 440W
Current Draw . . . . . . . . . . 3.7A @ 120VAC
Dimensions
(in.) 17 W x 2-1/4 H x 11 D
(mm) 432 W x 58 H x 280 D
Weight. . . . . . . . . . . . . . . . . . . . . . . . . 16 lbs/7.2 kg
Certifications: ETL
®
listed, CE
Whether specifying the A2 in a home theater
application or in a distributed audio system, this
single rack-height amp provides enough power to
handle the most inefficient freestanding speakers
or a whole house full of in-walls.
The A2 amplifier will deliver 150 watts per
channel into 2-Ohm loads. This high-current,
low-impedance design eliminates the need for
speaker selector boxes or load protection devices
when driving up to three pair of 8-Ohm speak-
ers. The ultra-high-efficiency toroidal transformer
and 40,000uF bulk storage capacitance ensures
that peak current demands are always met. This
translates into exceptionally tight bass response
and improved dynamic headroom.
Buffered loop outputs allow routing of the stereo
inputs to an additional power amplifier or surround
sound processor without signal loss or degradation.
Three pairs of gold-plated, five-way speaker bind-
ing posts make it easy to connect multiple speak-
ers. The remote trigger input mutes the amplifier
when the preamp is turned off. Gain pots for each
channel are accessible via the front panel.
FEATURES
 150 WPC RMS into 2 Ohms
100 WPC RMS into 4 Ohms
60 WPC RMS into 8 Ohms
 Buffered line level outputs
 Remote trigger IN / OUT
 Only 1 rack-space high
 Rack ear included
A2 2-CHANNEL POWER AMPLIFIER
ORDER NO. A2