Specifications

©2012 ELAN HOME SYSTEMS • PETALUMA, CA USA • ALL RIGHTS RESERVED


Also Available in 240VAC Version (Order No. D12-240)
Designed, built and rigorously tested for outstand-
ing reliability and sound, the D12 achieves a high
level of dependability and performance in multi-
channel amplification.
The D12 uses low heat/high effieiency Class D
digital technology with 8x oversampling and 48-bit
signal processing to deliver the cleanest audio and
most efficient amplification available today. Each of
the amplifier’s 12 channels have a true power rat-
ing of 75W into 8 Ohms and 100W into 4 Ohms –
with all channels driven. The D12 also incorporates
new, one-of-a-kind technologies that make its
setup, flexibility and performance truly unique.
Configuring the D12 is done through its front
panel buttons and display. From there you can set
input levels for each channel individually or for all
channels at once. You can also configure input
selections for direct stereo, mono mix-down, and
A/B bussing in both stereo and mono
Program features such as max volume output, min/
max turn-on levels for each channel, independent
triggers that allow you to turn on and off any mix
of amp channels, link/un-link channel pairs and
more. You can even create up to three “scenes”
that, with the touch of a button, can raise or lower
specific amp channels.
What’s more, the D12’s blue graphical LCD allows
you to view all your settings and provides impor-
tant diagnostic information such as faults, thermal
warnings and impedance load per channel.
All these features, and many more, have been
incorporated into a chassis design that exceeds all
standard quality assurance testing – and then some
– making the D12 the most reliable amplifier ever
built for multi-room audio applications.
FEATURES
 Designed, built and tested for outstanding
reliability and sound
 Class D Digital Technology w / 8X oversampling
& 48-bit signal processing
 True power ratings of 75WPC @ 8 Ohms &
100WPC @ 4 Ohms
 Low heat / high efficiency
 Patent-pending ACE™ Automatic Clip Eliminator
 Fault, thermal and impedance load monitoring
for each channel
 Blue graphical LCD for setup, monitoring &
diagnostics
 Intuitive front panel button setup
 “Lockout” feature fixes settings
 Programmable “scenes”
 Multiple input and Bus options
 Buffered loop outputs for each channel
 USB port allows for easy download from
ELAN configuration software
 VIA!Net jack for control & monitoring
 Rack-mount ears (incl.)
SPECIFICATIONS
Power Output (RMS) per channel 100W @ 4 Ohms,
. . . . . . . 75W @ 8 Ohms (all channels driven)
Frequency Response. . . . . . . . 20Hz to 20kHz,
-3dB into 8 Ohms
Full Power Bandwidth . . . . . . . .10Hz to25kHz
Signal-To-Noise . . . . . . > 102dB (A-weighted)
Channel Separation . . . . . . . . . . . . >-70dB
. . . . . . (channel to channel @ 1kHz)
Total Harmonic Distortion . . . . . . . . . < .04%
Intermodulation Distortion. . . . . . . . . < 0.1%
Input Impedance . . . . . . . . . . . .49k Ohms
Remote Trigger Inputs. . . . 5 to 24 Volts AC / DC
Trigger Loop Output . . . . . .+12VDC @ 10mA
AC Power Requirement . . . . . . 20VAC, 1440W
. . . . . . . . . . . . . . . . or 240VAC, 1440W
. . . . . . . . . . . . . . . . . .Standby @ 20W
Current Draw . . . . 12A @ 120VAC / 6A @ 240VAC
Dimensions w/ Feet (3U w/o Feet)
. . . . . . . . . . . . (in.) 17 W x 5-7/8 H x 17 D
. . . . . . . . . . . (mm) 432 W x 149 H x 432 D
Weight . . . . . . . . . . . . . . . . . . . . .47lbs. / 21.32kg
Certifications: cTUVus, CE, IC, C-Tick, CB Scheme, FCC
D12 12-CHANNEL DIGITAL POWER AMPLIFIER
ORDER NO. D12