Specifications

©2012 ELAN HOME SYSTEMS • PETALUMA, CA USA • ALL RIGHTS RESERVED


IRL2 IR Learner
Use with ONLY HC Series Controllers
ORDER NO. IRL2
 Connects to USB port
 Compatible w/ Common Resources Library
PPIR ROOM IR TERMINATION
WALL PLATE
Use with all HC Series Controllers
ORDER NO. PPIR
 IR sensor connection point
 Serial or Ethernet pass-through
 2 Cat-5e required for IR sensor and
RS-232/Ethernet use
 Single-gang Decora
®
design
SENSORS
ELANS complete line of status sensors (page 55)
are compatible with the HC series of controllers
and can be used for creating Event Maps and both
complex and simple automation schemes.
PPWM HEAD-END I/O
PRECISION PANEL
Use with all HC Series Controllers
ORDER NO. PPWM
 Required when using PPIR or PPRM
 Used to access HC6/12 IR outputs 7-12
 Must use PF2 Mounting Frame
 Connection point to distributer IR, sensor,
relay, and serial or network
 Requires 2 Cat-5e to utilize all capabilities
 Easiest way to get connections from PPWM
 Single-gang Decora® design
PPRM ROOM IR OUT/SENSE
RELAY WALL PLATE
Use with all HC Series Controllers
ORDER NO. PPRM
PF2 PRECISION PANEL FRAME
Use with PPWM
ORDER NO. PF2
 For more information
see pg 57
ACCESSORIES
F O R C O N T R O L L E R S
PPVN VIA!NET DISTRIBUTION
WALL PLATE Use with TS2
ORDER NO. PPVN
 Provides Power to Four TS2’s
 Provides Connection for IR from Four TS2’s
 Includes 16v Power Supply
GMOD USB TO
DIALTONE MODEM
ORDER NO. GMOD
USB phone modem to enable modem features
on an HC Controller. Use up to two per
controller.