Specifications

ACCESSORIES
complete
95
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
The PS12 Precision Panel isn’t just a
convenient trim-out solution for the
System12 (S12). With more sources, more
zones and more built-in features than any
other ELAN multi-room controller to date,
the number of wire runs and system
connections needed to get everything up
and running smoothly makes the PS12 a
necessity.
The rear panel of the PS12 features a
neatly laid out array of all the 110 punch-
downs necessary to ensure the quick,
reliable connection of keypads, touch
panels and local sources in every zone.
There are also dedicated punch-down
connectors for six ELAN
®
SENSE sensors
and VSE Electronic Volume Control IR
signals. A clearly labeled overlay shows
you both the color-code and function of
every connection. There’s even RJ-45 jacks
on the rear of the panel for an easy link
to additional PS12s in multi S12 systems.
The PS12’s front panel provides RJ-45
jacks for the instant connection of
keypads, touch panels and local sources
in every zone to the back of the S12
controller. Use ELAN C4545 one or two
meter RJ-45-to-RJ-45 interconnect cables
for reliable connections every time. Use
ELAN CSI 35 mm Stereo Sense Input
Cables to connect the PS12’s six sense
imput jacks directly to the S12. The front
panel also features DC power jacks for 4A
and 10A VIA!
®
power supplies and two
antenna connectors for the easy
connection of rooftop antennas to the
ELAN DTNR Digital Dual Tuner or the
XM-R3
TM
Triple Satellite Audio Receiver.
The front panel of the PS12 is removable,
making all your rear-panel punch-downs
easy. New-construction brackets are
available, or the PS12 can easily be
retro-fitted using the four clamping legs
attached to the frame, which clamp the
panel securely to drywall.
Additional panels would be required for
systems with two, three or four S12s.
The bottom line– using PS12 Precision
Panels results in a first-class, problem-free,
professional trim-out of even the largest
S12 systems.
PS12 SYSTEM12 PRECISION PANEL
FEATURES
Precision panel for the System12
Multi-Room A/V Controller
110 punch-down connectors for all
system keypads, touch panels, local
sources & sensors
Clearly labeled overlay denotes both
color-code & function
Front panel RJ-45 jacks for plug &
play connections to the S12
VIA!
®
DC power jacks
2 antenna jacks for system tuners
Removable front panel for easy rear
panel connections
PBKT6P Rough-In Brackets available
in pkgs of 6
Dimensions:
Wall cutout: .............(in.) 8 W x 10-1/2 H
(mm) 204 W x 267 H
Installed w/frame: ....(in.) 9-3/4 W x 12 H
(mm) 248 W x 305 H
The PZ•600 Precision Panel facilitates the
connection of telephone service, page,
doorbell and override signals, relays
and door stations to the Z•600
Communications Controller and ELAN
S Series Multi-Room Controllers.
The PZ•600 is one of ELAN’s new “half-
frame” Precision Panels. Two half-frame
panels can be mounted in one standard-
size Precision Panel frame for flexibility to
mix-and-match the Precision Panels
needed to complete a neat, problem-free
trim-out.
The back of the PZ•600 features standard
110 punch-downs for the connection of
incoming telephone service, two ELAN
door stations, four relays and eight
volume control override signals. There’s
also an RJ-45 jack for a quick and easy
link to the new PVSE Electronic Volume
Control Precision Panel.
The front panel of the PZ•600 has RJ-11
jacks for telco and phone, and RJ-45 jacks
for relays, override control and two door
stations. All just plug right into the back
of the Z•600 Communications Controller.
DB1 and DB2 ELAN
®
SENSE jacks are also
provided for easy connection to System12
(S12) or System6 (S6) Sense Inputs, as is a
page/doorbell out jack for connection to
the S12. A front panel DC power jack
allows you to connect an ELAN power
supply if using multiple volume controls
with override.
PZ•600 Z•600 PRECISION PANEL
FEATURES
1/2-frame precision panel for the
Z•600 Communications Controller
110 punch-down connectors for
telephones, override, relays & door
stations
Clearly labeled silkscreen for error-
free terminations
Front panel RJ-45/RJ-11 & “mini”
jacks for plug & play connections to
the Z•600, S12 & S6
DC power jack for powering
additional volume controls w/override
Fits in PF2 Precision Panel Frame
(required for installation), see
ACCESSORIES, pg.101
PWR12 12VDC, 2A power supply (incl.)
ORDER NO. PS12
ORDER NO. PZ600