Specifications

connect
90
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
STRUCTURED WIRING
FEATURES
Single-channel modulator
Converts Cat-5 video & audio signals
to line-level for distribution
RCA jacks for direct connection of
A/V component
RCA jacks can be configured as
inputs or outputs
CAT5 Audio/Video Wall Plate
(CAT5AVWP) sold separately
5 grid spaces
Specifications: Typical @ 25ºC ± 5ºC
Inputs (Ports) Video 1 Vp-p @ 75 Ω
Video termination 75 Ω in normal mode (NORM)
(switch selectable) >1MΩ in loop through mode (LOOP)
Audio 1 V rms @ 47k Ω
L & R inputs combined for monaural
Video Performance Differential gain 4%
Differential phase <4º
Signal/noise 55dB
RF Output Standard UHF CATV
Channel ranges 14-64 65-125 (excl. 95-99)
Output level +25dBmV (+85dBuV)
IM distortion -60dBC
Alternate channel -45dBC @ 12MHz
Power Supply Output current 600mA
Output voltage 15 VDC
Input power 105-125 VAC
The CAT5MOD is a dual-purpose module.
It can be used as a simple single-channel
modulator for any video source, or it can
be used to receive both audio and video
signals from a remotely located source
down a single run of Cat-5 wire. It will
distribute the signals to any TV or monitor
(CAT5AVWP required, see below).
CAT5MOD SINGLE-CHANNEL CAT-5 MODULATOR
FEATURES
Sends local source audio & video
down Cat-5 wire to the CAT5MOD
Switchable 75 Ohm or Hi-Z
termination & loop-through
capability
Single-gang, Decora
®
-style wall plate
Available in white only
The CAT5AVWP provides an easy way
to send the video and audio of a local
source (i.e. DSS receiver or DVD player in
a bedroom) back to the “head end”
where it can then be distributed around
the home. The CAT5AVWP connects to
the ELAN CAT5MOD, a single-channel
modulator that uses a single run of Cat-5
wire in lieu of standard coax.
Note: The CAT5AVWP is not a standalone
video interface. Use only with CAT5MOD
Single-Channel Modulator.
CAT5AVWP CAT-5 AUDIO/VIDEO WALL PLATE
Specifications: Typical @ 25ºC ± 5ºC
ORDER NO. CAT5MOD
ORDER NO. CAT5AVWP