Specifications

connect
86
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
STRUCTURED WIRING
VDA38H 3x8 HIGH-HEADROOM RF DISTRIBUTION AMPLIFIER
The VDA38B is the heart of any RF
distribution system. This 3-IN by 8-OUT
bi-directional RF distribution amplifier
connects as many as eight televisions to
cable or antenna while maintaining opti-
mum signal strength to all TVs. It also has
the capability of sending IR down each
coax run for control of local TVs or video
source components. The VDA38B is
perfect for bi-directional cable systems,
providing a 5-42MHz back channel for
cable modems or interactive set-top
boxes.
VDA38B 3x8 BI-DIRECTIONAL RF DISTRIBUTION AMPLIFIER
VIDEO DISTRIBUTION PRODUCTS
Have access to all video from anywhere in the home. Each and every room can display
high-quality video from VCRs, satellite receivers, TVs, cameras and more, using these
video “distribution” products.
FEATURES
3 x 8 RF distribution amplifier
High-headroom for off-air antenna
applications
Transmits IR down coax for local
source control (CXIRWP Coax/IR Wall
Plate required, see pg. 87)
5 grid spaces
SPECIFICATIONS
Gain:
CATV/Antenna port to output: ......3dB
Modulator input to output: ......-10dB
Isolation: ........................................>80dB
Modulator input to CATV/Ant: ....5-1000
MHz fwd
Max CATV/Antenna input: ........20dBmV
(+85dBuV)
Power supply : .....15VDC @ 300mA (incl.)
The VDA38H is a 3-IN by 8-OUT
high-headroom RF distribution amplifier
for antenna or uni-directional cable
systems. It offers the highest headroom
of any coax panel available on the
market. Like the VDA38B, the VDA38H
connects as many as eight televisions to
cable or antenna while maintaining
optimum signal strength to all TVs. It
also has the capability of sending IR
down each coax run for control of local
TVs or video source components.
FEATURES
3 x 8 RF distribution amplifier
Bi-directional – ideal for cable
systems, cable modems or interactive
set-top boxes
Transmits IR down coax for local
source control (CXIRWP Coax/IR Wall
Plate required, see pg. 87)
5 grid spaces
SPECIFICATIONS
Gain:
CATV/Antenna port to output: .......3dB
Modulator input to output: ..... -10dB
Output to CATV (reverse): .........-15dB
Isolation: ....................................... >35dB
Modulator input to CATV/Ant:
54-1000MHz fwd
5-42MHz reverse
Max CATV/Antenna input: ........20dBmV
(+85dBuV)
Power supply : .....15VDC @ 300mA (incl.)
ORDER NO. VDA38B
ORDER NO. VDA38H