Specifications

connect
82
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
STRUCTURED WIRING
FEATURES
Fits in E36, E32 & E18 Enclosures
Mounts at top or bottom, left or
right of enclosure
Accommodates 2 duplex AC outlets:
4 outlets total (not incl.)
UL
®
listed
AC4 DUPLEX OUTLET BOX
FEATURES
Connects to the grid pattern on
E36 & E18 Enclosures
Lifts modules one in. above grid
Adds wire management capability
Increases usable space
Compatible w/E36 & E32 SW
Enclosures only
The ECS Cable Spacer fits in SW E36 and
E18 Enclosures and is designed to lift SW
modules 1 in. above the enclosure’s grid,
leaving room behind it for easy wire
management.
ECS ENCLOSURE CABLE SPACER
The AC4 Duplex Outlet Box brings AC
power inside the E36, E32 and E18
Enclosures and gives the installer a clean,
easily accessible location to mount power
adaptors. This UL
®
listed accessory can
mount in any corner of the enclosure
using the screws provided.
For use with the E36 and E18 Enclosures,
these 2 in. conduit-size coupling tubes
allow the installer to neatly run cables
between stacked SW Enclosures.
FEATURES
2 in. conduit size passes cables from
enclosure to enclosure
No limits to number of enclosures
coupled
Automatically spaces enclosures
2 in. apart
Compatible w/E36 & E18 SW
Enclosures only
ECT ENCLOSURE COUPLING TUBE
EG2 2" ENCLOSURE GROMMETS
FEATURES
Solid plastic grommets for 2 in.
knockouts
Easy routing of cables through
knockouts
Available in pkgs of 5
These snap-in grommets fit in the 2 in.
knockouts in E36 and E18 Enclosures,
allowing for easy routing of cables
thorough the knockouts without any
rough, metal edges to damage cable
insulation.
ORDER NO. AC4
ORDER NO. ECS
ORDER NO. ECT
ORDER NO. EG2