Specifications

connect
81
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
STRUCTURED WIRING
E10 10" ENCLOSURE
FEATURES
Easy installation
Vertical or horizontal mounting
Surface mounts over single- or
double-gang openings
16-gauge galvanized steel
C10 Enclosure Cover sold separately
19 grid spaces
Available in white only
ETL
®
listed
Dimensions
(in.) 6-1/2 W x 10-1/8 H x 1/2 D
(mm) 166 W x 258 H x 13 D
Ideal for basic or specialized distribution
applications, this 10 in. surface-mount
grid can accommodate up to three SW
modules and can be mounted over single
or double-gang openings.
C10 10" ENCLOSURE COVER
FEATURES
Snaps directly on to E10 Enclosure
Deep enough to fit over SW module
16-gauge galvanized steel
Available in white only
This galvanized steel cover for the E10
simply snaps on over the 10 in. grid and
is deep enough to clear any SW grid-
mounted module.
C18H 18" HINGED ENCLOSURE COVER
FEATURES
Hinged door kit for E18 Enclosure
Quick & easy installation
Increased ventilation over standard
enclosure cover
Provides additional 1 in. of depth to
the enclosure
Injection molded plastic
Available in white only
ETL
®
listed
Designed to be used with the E18
structured wiring enclosure, the C18H
is an injected-molded, hinged door kit
that provides easy access to components
in the E18. It also adds an additional 1 in.
of depth to the enclosure, which allows
for larger power supplies to be used
when an AC4 Duplex Outlet box is
installed in the enclosure. The door is
retained to the door frame with a
snap-action lock. Component cooling is
also improved with increased ventilation
over standard enclosure covers.
FEATURES
Cover for E18 Enclosure
Installs easily
Top & bottom vents
16-gauge galvanized steel
Available in white only
This galvanized steel cover for the E18
Enclosure installs easily with four screws
(provided) and is vented at both top and
bottom.
C18 18" ENCLOSURE COVER
ORDER NO. C18
ORDER NO. C18H
ORDER NO. E10
ORDER NO. C10