Specifications

connect
79
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
STRUCTURED WIRING
This 32 in. SW enclosure is molded from
impact-resistant ABS material and meets
UL 94V-0/5VA flame-retardant ratings.
The E32 provides years of long-lasting
protection for SW components, as well
serving as a wire management center and
distribution hub for just about any other
A/V distribution components an installer
would want to add.
The patented top entry “Wire-Gater” and
clamping bar ensure a clean, finished
look to the wire dress. Multiple top and
bottom circular knock-outs accommodate
various wire clamp sizes. The E32 fits
between 16 in. (on center) studs for a
clean flush-mount finish. Staggered
mountings “ears” allow multiple E32s
to be placed in adjacent stud bays.
Alternatively, the E32 can be mounted
directly to the surface of any finished
wall.
G32 32 in. Mounting Grid required for
mounting SW Data, Telephone and Video
Distribution Modules.
FEATURES
32 in. high enclosure
Molded from impact resistant ABS
material
Patented “Wire-Gater” for clean
wire dress
Top knockouts: (4) 1-3/8 in.,
(2) 1-1/8 in., (4) 3/4 in.
Bottom knockouts: four 1-3/8 in.,
seven 1-1/8 in., two 3/4 in.
Accepts AC4 outlet box accessory &
ECS cable spacer
Flush or surface mountable (must be
surface mounted on firewalls)
UL 94 V-0/5VA flame retardant rated
for use in non-fire-rated walls
G32 Mounting Grid & C32 Enclosure
Cover sold separately
UL
®
listed
Dimensions
Enclosure Exterior:
(in.) 14-3/8 W x 32-1/4 H x 4 D
(mm) 366 W x 820 H x 102 D
Enclosure Interior:
(in.) 13 W x 26-1/2 H x 3-1/4 D
(mm) 330 W x 674 H x 83 D
E32 32" ENCLOSURE (FORMERLY ELAN B2000)
FEATURES
Hinged door kit for E36 Enclosure
Quick & easy installation
Increased ventilation over standard
enclosure cover
Provides additional 1 in. of depth to
the enclosure
Injection molded plastic
Available in white only
UL
®
listed
This hinged door kit provides an
injection-molded, light-weight, yet
durable enclosure cover for easy access
to components in the E36 structured
wiring enclosure. The door kit adds an
additional 1 in. of depth to the enclosure,
allowing for larger power supplies to be
used when an AC4 Duplex Outlet Box is
installed in the enclosure. Component
cooling is also improved with increased
ventilation over standard enclosure
covers. A snap-action lock retains the
door to the door frame when closed.
C36H 36" HINGED ENCLOSURE COVER
ORDER NO. C36H
ORDER NO. E32