Specifications

Important accessories that complete ELAN’s IR Control product line.
The IRIC is a 3.5 mm mono “mini”plug
interconnect cable that is used for IR
connections between ELAN multi-room
controller IR output ports and any source
that has a 3.5 mm IR input jack. Ideal for
use with the ELAN Z•880 Video Controller,
VIA!
®
dj Digital Music Servers and the
DTNR Dual Digital Tuner. Also perfect for
routing the trigger outputs of ELAN
multi-room controllers to ELAN amplifiers,
Z•Fans, and the Z•Power Controller.
IRIC IR INTERCONNECT CABLE (FORMERLY IR2043)
IRXC 15’ IR SENSOR EXTENSION CABLE
Designed specifically to allow you to
control one source from two independent
IR outputs, the IRYC is a one foot long “Y”
cable that converts any ELAN IR Emitter
into a dual-plug IR emitter. Internal diodes
built into the IRYC prevent conflicts
between IR outputs.
IRYC IR EMITTER “Y” CABLE
FEATURES
1-foot “Y” cable for dual-plug/
single-emitter applications
Internal diode protection
Non-retail packaging
FEATURES
Plug-and-play cable for direct IR jack
connections between components
3.5 mm plug-to-3.5 mm plug, 2 m
length
Available in packages of 6
Not for use with the IRD4 Amplified
Distribution Block
Non-retail packaging
FEATURES
Extends IR Sensor cables 15 ft
Compatible with IRS1, IRS3, IRS5
& IRS7EP plasma-friendly sensors
Full-color retail box standard
IR ACCESSORIES
PWR2
200mA, 12 VOLT DC
REGULATED POWER SUPPLY
For larger distributed IR
systems, this regulated
2.1 amp power supply
will handle up to ten
IRD4s and all the sensors
and emitters connected
to them. Full-color retail
box is standard.
PWR3
2.1A, 12 VOLT DC
REGULATED POWER SUPPLY
Note: The IRIC IR Interconnect Cable can
not be used with the IRD4 Amplified IR
Distribution Block. For connecting the IRD4
to any ELAN IR output, use the 3.5 mm
quad-to-mono interconnect cable that is
included with the IRD4.
command
71
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
IR SYSTEMS
This 15-foot cable provides a quick and
easy means of extending the cable length
of any ELAN quad-plug ELAN IR Sensor.
For use with the IRD4
Amplified IR Distribution
Block IR, this regulated
200mA power supply is
capable of powering the
IRD4 and all the sensors
and emitters connected
to it. Full-color retail box
is standard.
ORDER NO. IRIC
ORDER NO. IRXC
ORDER NO. IRYC
ORDER NO. PWR2
ORDER NO. PWR3