Specifications

hear
37
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
SPEAKERS
THP525W DUAL 5.25" IN-WALL HOME THEATER SPEAKER
The goal here was two-fold – develop a
high-end, in-wall home theater speaker
with the sonic characteristics of a quality
cabinet speaker and make it as flexible as
possible. The results were everything we
expected them to be.
Introducing the THP525W, where
architectural design, versatility of
placement and uncompromising sound
unite to make an in-wall speaker for the
ages! The THP525W’s carefully-voiced
dual 5.25 in. woven Kevlar woofers and
1 in. woven Kevlar pivoting dome tweeter
are mounted on a baffle with a tilt of 15
degrees. When used as a left or right
stage speaker, this ensures that the sound
is pointed into the listening area for
optimal stereo imaging. The pivoting
tweeter allows fine tuning of the
direction even further. But that’s just the
half of it.
As a horizontally-installed center channel
speaker, the THP525W’s angled baffle
allows its placement above or below the
television screen, ensuring that all center
channel audio is pointed in the right
direction – toward the listener.
FEATURES
High-end front stage (L, C, R) or
surround in-wall loudspeakers
15° angled baffle for left, right,
center channel above & below TV
placement
Dual 5.25 in. woven Kevlar woofers,
shielded
1 in. woven Kevlar pivoting dome
tweeter
3-position (bright, neutral, warm)
room compensation switch
-20dB bass limiting switch for use
w/subwoofers
Slim footprint, narrow frame, low
profile grille
Paintable frame & grille (paint
shield incl.)
ELAN Laser Pointer (incl.)
SPECIFICATIONS
System Type: .............2-way dual woofer,
MTM design
Crossover: ............3rd order custom “Q“&
slope @ 2.4kHz
Switches: .......EQ switch (bright, neutral,
warm), bass limiting
Woofer: .....................2 x 5-1/4 in. woven
Kevlar fiber cone, aluminum phase
plug, neo magnet, cast frame
Tweeter: .................pivoting 1 in. woven
Kevlar dome, fluid cooling,
rear wave damping, neo magnet
Frequency Response:..........55Hz - 20kHz
Sensitivity: ........................................88dB
Impedance: ..................................6 Ohms
Rated Power: ....................................90W
Dimensions
Frame: ..........(in.) 8-3/8 (W) x 15-7/16 (H)
(mm) 213 (W) x 392 (H)
Cutout: ...........(in.) 7-1/4 (W) x 14-3/8 (H)
(mm) 184 (W) x 365 (H)
Mounting Depth: .............. 4 in. (102 mm)
ORDER NO. THP525W