Specifications

hear
36
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
SPEAKERS
THP650W DUAL 6.5" IN-WALL HOME THEATER SPEAKER
Never again will performance be
sacrificed at the expense of architectural
design.
Introducing the TheaterPoint THP650W
In-Wall Home Theater Speaker from
ELAN. With its slim footprint, narrow
frame and low profile grille, the
THP650W disappears seamlessly into the
walls of any home theater; yet it’s their
sound that distinguishes these speakers
from all others.
Meticulous detail was taken in the
voicing of the THP650W, with the goal of
reproducing the sonic qualities of a high-
end cabinet speaker. The result is an
in-wall speaker for the home theater that
will knock the socks off of anyone. The
finely-tuned array of dual 6.5 in. woven
Kevlar woofers and a 1 in. woven Kevlar
pivoting tweeter produce a sonic
excellence across the frequency spectrum
that is unmatched by any in-wall speaker
to date.
FEATURES
Premium front stage (L, C, R) or
surround in-wall loudspeakers
Dual 6.5 in. woven Kevlar woofers,
shielded
1 in. woven Kevlar pivoting dome
tweeter
3 position (bright, neutral, warm)
room compensation switch
-20dB bass limiting switch for use
w/subwoofers
Slim footprint, narrow frame, low
profile grille
Paintable frame & grille (paint
shield incl.)
ELAN Laser Pointer (incl.)
Note: The THP650W cannot be installed
horizontally in a standard 16 in. off-
center stud bay. Consideration during
construction, or modifications to the stud
bay, would need to be addressed prior to
installation.
SPECIFICATIONS
System Type: .............2-way dual woofer,
MTM design
Crossover: .............3rd order custom “Q“ &
slope @ 2.2kHz
Switches: .......EQ switch (bright, neutral,
warm), bass limiting
Woofer: ....2 x 6.5 in. woven Kevlar fiber
cone aluminum phase plug,
cast frame
Tweeter: .................pivoting 1 in. woven
Kevlar dome, fluid cooling,
rear wave damping, neo magnet
Frequency Response: ..........40Hz - 20 kHz
Sensitivity: .........................................90dB
Impedance: ...................................6 Ohms
Rated Power: ....................................110W
Dimensions
Frame: .............(in.) 9-7/8 (W) x 16-3/8 (H)
(mm) 251 (W) x 516 (H)
Cutout: ..........(in.) 8-5/8 (W) x 15-3/16 (H)
(mm) 219 (W) x 386 (H)
Mounting Depth: ............ 4 in. (102 mm)
ORDER NO. THP650W