Specifications

power
31
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
AMPLIFIERS
Z
•
FAN2 SYSTEM COOLING MODULE
The Z•FAN2 was developed to address the
growing need for cabinet and rack system
cooling, and it does so in a quiet, low-
profile, unobtrusive fashion.
This single-rack fan design will draw up
to 150 cubic feet of air per minute. Dual
12VDC brushless motors maintain whisper
quiet operation without noise feeding
back into the 120V circuits.
Temperature-sensitive speed control
provides just the right amount of cooling
at just the right times, thus minimizing
background fan noise! The remote trigger
input turns the fan on and off when
needed. The trigger loop output can be
daisy chained to additional triggerable
devices or Z•FANs, and the two-minute
turn off delay circuit prevents heat build
up in the rack once the equipment has
been turned off.
Also Available in 19 in. Rack-Mount Version (Order No. ZFAN2R)
and 230VAC Versions (Order No. ZFAN230/ZFANR230)
AMPLIFIERS
FEATURES
Temperature-sensing dual 12VDC
brushless fan design
Front panel power & “Fan On” LEDs
2 minute turn-off delay
SPECIFICATIONS
Flow Rate: .......variable, up to 150 cu. ft.
per minute
Remote Trigger Input: ..........5-24V AC/DC
+12VDC @ 0.1A
Trigger Loop Output: .....+12VDC @ 0.1A
Power Requirements: ........120VAC, 12W
or 230VAC, 12W
Dimensions
Z
•
FAN2: .........(in.) 17 W x 2-1/4 H x 10 D
(mm) 432 W x 58 H x 254 D
Z
•
FAN2R: ........(in.) 19 W x 1-3/4 H x 10 D
(mm) 483 W x 45 H x 254 D
Weight: ..................................9 lbs/4 kg
ETL
®
listed
ORDER NO. ZFAN2