Specifications

power
30
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
AMPLIFIERS
Z
•
300 2-CHANNEL POWER AMPLIFIER
FEATURES
150 WPC RMS into 2 Ohms
100 WPC RMS into 4 Ohms
60 WPC RMS into 8 Ohms
Buffered line level outputs
Remote trigger IN/OUT
Only 1 rack-space high
SPECIFICATIONS
Frequency Response: ...20Hz to 20kHz -.5dB
Full Power Bandwidth: ......5Hz to 30kHz
Signal to Noise: .....>110dB (A-weighted)
Channel Separation: ........>70dB @ 1kHz
THD: ............................................< 0.03%
Intermodulation Distortion: .......< -90dB
Voltage Gain (Av): ........................0 to 28,
front panel adjustable
Input Impedance: ....................33k Ohms
Remote Trigger Input: ........5-24V AC/DC
Trigger Loop Output: ....+12VDC @ 0.1A
Input Sensitivity: ........0dBu (.707 VRMS)
AC Power Requirements: ....120VAC, 440W
or 230VAC, 440W
or 240VAC, 440W
Current Draw: .................3.7A @ 120VAC
2.0A @ 230VAC
1.85A @ 240VAC
Dimensions
Z•300: .............(in.) 17 W x 2-1/4 H x 11 D
(mm) 432 W x 58 H x 280 D
Z•301:..............(in.) 19 W x 1-3/4 H x 11 D
(mm) 483 W x 45 H x 280 D
Weight: ..............................16 lbs/7.2 kg
ETL
®
listed & CE approved
Whether specifying the Z•300 in a home
theater application or in a distributed
audio system, this single rack-height amp
provides enough power to handle the
most inefficient freestanding speakers or
a whole house full of in-walls.
The Z•300 amplifier will deliver 300 watts
of power into 2-Ohm loads. This high-
current, low-impedance design eliminates
the need for speaker selector boxes or
load protection devices when driving up
to three pair of 8-Ohm speakers. The
ultra-high-efficiency toroidal transformer
and 40,000uF bulk storage capacitance
ensures that peak current demands
are always met. This translates into
exceptionally tight bass response and
improved dynamic headroom.
Buffered loop outputs allow routing of
the stereo inputs to an additional power
amplifier or surround sound processor
without signal loss or degradation.
Three pairs of gold-plated, five-way
speaker binding posts make it easy to
connect multiple speakers. The remote
trigger input mutes the amplifier when
the preamp is turned off. Gain pots for
each channel are accessible via the
front panel.
Also Available in 19 in. Rack-Mount Version (Order No. Z301)
and 230VAC/240VAC Versions (Order No. Z300230/Z301230/Z300240/Z301240)
ORDER NO. Z300