Specifications

power
29
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
AMPLIFIERS
Z
•
660 6-CHANNEL POWER AMPLIFIER
FEATURES
60 WPC RMS into 8 Ohms
120 WPC RMS into 8 Ohms, bridged
Front panel gain pots, signal presence,
clip & IR pass-through LED indicators
Bus Mode switch
Buffered line level outputs
IR pass-through connecting block
Remote trigger IN/OUT
Only 1 rack-space high
SPECIFICATIONS
Frequency Response: .........20Hz to 20kHz
-.25dB
Full Power Bandwidth: ....10Hz to 30kHz
Signal to Noise: .....>110dB (A-weighted)
Channel Separation: .........>70dB @ 1kHz
THD: ............................................< 0.03%
Intermodulation Distortion: .......< -90dB
Voltage Gain (AV): .....0 to 28, adjustable
Input Impedance: ....................20k Ohms
Remote Trigger Input: .........5-24V AC/DC
Trigger Loop Output: ......+12VDC @ 0.1A
AC Power Requirements: ....120VAC, 440W
or 230VAC, 440W
or 240VAC, 440W
Current Draw ..................3.7A @ 120VAC
2.0A @ 230VAC
1.85A @ 240VAC
Dimensions
Z•660: .............(in.) 17 W x 2-1/4 H x 11 D
(mm) 432 W x 58 H x 280 D
Z•661: .............(in.) 19 W x 1-3/4 H x 11 D
(mm) 483 W x 45 H x 280 D
Weight: ................................16 lbs/7.2 kg
ETL
®
listed & CE approved
Designed specifically for the custom
installer, the Z•660 Power Amplifier is the
cornerstone of any high-fidelity system.
The Z•660 provides six channels at 60
WPC or three channels at 120 WPC in a
1-3/4 in. single rack-space plus additional
features not found on an amplifier (of
any size) on the market today.
Six front panel gain pots, signal presence
and clip indicators make setup a snap! A
convenient Bus Mode switch allows one
stereo input to be routed to three pairs
of amplified outputs without the need
for additional patch cables. Independent
bridge mode buttons allow mixing of
bridged and un-bridged channels.
Buffered line level outputs can be
Y-corded for mono signal applications.
The built-in IR connecting block can
power up to four IR receivers and
emitters – great for standalone IR control
applications! The remote trigger input
mutes the amplifier when the preamp is
turned off.
The ultra-high-efficiency toroidal
transformer and 40,000uF bulk storage
capacitance ensures that peak current
demands are always met.
Also Available in 19 in. Rack-Mount Version (Order No. Z661) and
230VAC/240VAC Versions (Order No. Z660230/Z661230/Z660240/Z661240)
AMPLIFIERS
ORDER NO. Z660