Specifications

touch
9
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
USER INTERFACES
©2006 ELAN HOME SYSTEMS • Lexington, KY USA • All Rights Reserved.
Bedside or desktop control has never
looked better than with a Z•100/Z•150
installed in the Z•PAD Valet! Z•PAD Valets
are handcrafted from select Kentucky
hardwoods and then finished in a choice
of rich colors. These valets will also
accommodate ELAN volume controls and
IR tubes!
Elegant to the touch, these valets include
soft rubber feet to prevent marring or
scratching furniture finishes.
Note: The Z•VALET does not accommodate
the Z•250 or Z•200 keypads.
Z
•
VALET Z•100/Z•150 DESKTOP VALET
FEATURES
Hardwood Tabletop Valet for
Z•100/Z•150
14 ft. RJ-45-to-RJ-45 interconnect
cable (incl.)
Double & single-cutout tops for
mounting a Z•100/150 combo or just
a Z•100
Available in white, dark cherry, black
& unfinished
Dimensions
(in.) 5-1/2 W x 3-1/2 H x 4-3/4 D
(mm) 140 W x 89 H x 121 D
Use ELAN PWR12 Power Supplies for
systems with Z•025s, multiple volume
controls with override or to add
additional Z•PADs to the Z•630.
PWR12 POWER SUPPLY (FORMERLY Z•027)
SPECIFICATIONS
Output Voltage: ...............12VDC @ 2.1A
UL
®
listed
A must-have accessory for audio
sub-zone muting and local in-room source
control. The Z•025 mounts directly to the
back of the Z•100 or Z•250 keypad.
Speaker Relay Mode
A Z•025 on each Z•100/250 keypad allows
muting or unmuting the speakers in one
room of a zone independently of other
speakers in that zone.
Audio Detect Mode
The Z•025 automatically switches a local
audio source to the in-wall speakers when
detected, and then switches back to the
main system audio when the local source
is turned off or when an ELAN Page/Door
Chime is detected.
Note: Z•025 Audio Detect mode is not
available when used with the System12.
Z
•
025 SPEAKER RELAY/AUDIO DETECT SWITCHING MODULE
FEATURES
Deplugable, labeled connector
Installs on the back of a Z•100 or
Z•250
Deplugable, labeled connector
SPECIFICATIONS
Speaker level detect threshold: .......5mV
min. to 500mV max.
Switch back delay time:......... Adjustable
from 10 to 60 seconds
Priority Switcher Relay: ...................4PDT
Speaker Disconnect Relay: ......DPDT 10A
contacts
Power Requirements: ...85mA @ +12VDC
(total keypad current draw 150mA)
Wiring Requirements: ...18 AWG twisted
pairs for speaker level connections.
(For page & door chime connections,
use spare pair from the Z•100 Cat-5)
ORDER NO. ZVALET
ORDER NO. Z025
ORDER NO. PWR12