Installation manual

© ELAN Home Systems 2005 • All rights reserved. Page 15
ELAN HOME SYSTEMS INSTALLATION MANUAL THP525W/THP650W/THP650D
Speaker Enclosures (cont’d)
2 x 6 Studs
When installing TheaterPoint in-wall speakers into a pre-construction
environment using 2" x 6" (or greater) wall studs, airtight back boxes
may be constructed. The following chart gives the aproximate volume
of back boxes built for each TheaterPoint in-wall speaker. Measure-
ments shown in the chart are outside dimensions. Back boxes are
typically constructed of 2" x 6" lumber and 3/4" MDF (Medium Density
Fiberboard) and should be made to fi t between studs. Use glue or
silicone sealant at all joints.
Speaker Volume Inside Dimensions % Fill
THP525W 13.5 L (976 cu. in.) 3.5 in. x 14.5 in. x 20 in. 25%
THP650D 13.5 L (976 cu. in.) 3.5 in. x 14.5 in. x 20 in. 25%
THP650W 24 L (2030 cu. in.) 3.5 in. x 14.5 in. x 30 in. 50%
2 x 6
Wall
Stud
2 x 6
2 x 6
3/4"
MDF
3/4"
MDF