Installation manual

THP525W/THP650W/THP650D INSTALLATION MANUAL ELAN HOME SYSTEMS
Page 8 © ELAN Home Systems 2005 • All rights reserved.
In-Wall Stereo Speaker Pairs
There are three common scenarios for connecting stereo speaker
pairs to a distributed audio system:
• One 4-conductor speaker wire runs from the amplifier to one
speaker w/ 2 conductors connected. The second 2-conductors
are spliced and connected to a 2-conductor speaker wire that
runs to the second speaker.
Amplifier
• Two separate two-conductor speaker wires run from the amplifier
to each stereo speaker.
Amplifier
Volume
Control
• One four-conductor speaker wire runs from the amplifier to a
stereo volume control, then one two-conductor speaker wire
runs to each stereo speaker.