Specifications
©2011 ELAN HOME SYSTEMS • CARLSBAD, CA USA • ALL RIGHTS RESERVED
72
General Products
18 in. H enclosure
34 x 2 grid spaces (68 total)
Fits in standard 16 in. on-center stud bay
Knock outs: (8) 2 in., (4) 3/4 in.
Dimensions:
(in.) 14-1/4 W x 18 H x 3-3/16 D
(mm) 362 W x 458 H x 97 D
E18 18” ENCLOSURE
ORDER NO. E18
C18H 18” HINGED ENCLOSURE COVER
ORDER NO. C18H
C18 18” ENCLOSURE COVER
ORDER NO. C18
Hinged, easy-access cover for E18 enclosure
Injection-molded plastic construction
Increased ventilation
Adds an extra 1 in. of depth
16-gauge galvanized steel cover for 18 in.
enclosure
Top & bottom vents
ENCLOSURES & ACCESSORIES continued
ECS ENCLOSURE
CABLE SPACER
ORDER NO. ECS
Lifts modules 1 in. above
enclosure’s grid for easy wire
management
Increases usable space
For use w / E36 & E18 enclosures
EG2 2” ENCLOSURE
GROMMETS
ORDER NO. EG2
Solid plastic grommets for 2 in.
knockouts
Facilitates easy routing of cables
through knockouts
Available in pkgs. of 5
ECT ENCLOSURE
COUPLING TUBE
ORDER NO. ECT
2 in. conduit-size tubes for
passing cables between stacked
enclosures
For use w / E36 & E18 enclosures
FEATURES
8-line data hub
Certified 100 Base-T performance
Cat-5 performance in a multi-port hub
(8) RJ-45 jacks
(8) 110 punch-down connectors
6 grid spaces
The DH8 is an eight-port data hub with certified
100 Base-T performance. The DH8 features eight
RJ-45 jacks for the termination of Cat-5 data lines
and eight 110 punch-down connector blocks to
route services to wall plates throughout the home.
DH8 DATA HUB
ORDER NO. DH8
SNSRBKT SENSOR BRACKET
ORDER NO. SNSRBKT
Mount your ELAN Sensors and modems for HC
Controllers into an ELAN Enclosure using this
bracket.
Fits ELAN Enclosures
Provides for a clean installation
HC4BKT HC4 BRACKET
ORDER NO. HC4BKT
Easy and clean mounting for the HC4 System
Controller.
Fits ELAN Enclosures