Specifications

©2011 ELAN HOME SYSTEMS • CARLSBAD, CA USA • ALL RIGHTS RESERVED
67
General Products
SIM2 SENSOR INTEGRATION MODULE
SPECIFICATIONS
Relays (x2)
Type . . . . . . . NO / NC closed contact relay
Max. Rated Load Switched by Relay. . . .0.5A @
. . . . . . . . . . 125VAC or 1A @ 24VDC
Sense Inputs (x4)
Connector . . . . . . . . . 3.5 mm stereo jack
Tip . . . . . . . . . . . . +5V power to sensor
Ring . . . . . . . . . . . . .Contact closure or
. . . . . . . . . . ELAN SENSE open collector
Sleeve . . . . . . . . . . . . . . . . . . . . . . . . .Ground
Power . . . . . . . . . . . . . 5VDC @ 90mA
Power Requirements . . . . . . . . 12VDC, 2.1A
Connector Power Output . . . .+12VDC @ 0.65A
ORDER NO. SIM2
The SIM2 is a low-cost, simple automation solution
designed to work seamlessly with ELAN
®
SENSE
Sensors. The SIM2 functions as a stand-alone four
sensor input/two relay output module that provides
dry contact closure or 12V output in response
to sensor input status. Built-in relays respond to
sensor triggers differently based on conditional
logic “and / or” dip switch settings on the unit.
This allows any ELAN SENSE automation sensor, or
standard motion, driveway or door/window sensor,
to intelligently trigger relays on the SIM2 based on
the dip switch settings. The SIM2 is ideal for Home
Theater automation applications, or any applica-
tion that requires the use of automated triggering
through the use of sensors.
FEATURES
 Simple automation solution for ELAN SENSE
Automation Sensors
 4 sensor inputs (1 pair for ea. relay)
 2 relay outputs which provide contact closure
or 12 volts
 Conditional and/or logic dipswitches provide
intelligent relay triggering
 No software programming required
 Mounts on any flat surface (mounting screws
& adhesive backing strip incl.)
 Includes 12VDC, 2.1A Power Supply
SPP SYSTEM PRECISION PANEL
 The one Precision Panel for all ELAN
Multi-Room Controllers
 For use w / S128P, S86P, S86A, M86A ,S66A,
SS1, TS2 and all HC Series Controllers
 Provides quick, clean, reliable connectivity for
all system wire runs
 In-wall or rack-mountable w / PRM2 Precision
Panel Rack Mount Kit
Dimensions
Wall cut-out (in.) 8 W x 10-1/2 H
(mm) 204 W x 267 H
Installed w / frame (in.) 9-3/4 W x 12 H
(mm) 248 W x 305 H
ORDER NO. SPP
ELAN
®
SENSE AUTOMATION SENSORS continued
PRECISION PANELS
PSP6
6-PAIR SPEAKER
PRECISION PANEL
ORDER NO. PSP12
FEATURES FOR PSP12 &PSP6
 Easy-turn hex nut binding posts
 Connect speakers in every room to amps at the
head end
 PSP12: full-size panel w / connections for 12 pr.
of speakers
 PSP6: 1/2-frame panel w / connections for 6 pr. of
speakers
 Binding posts accept up to 12AWG, spade lugs or
banana plugs
 PSP6 requires PF2 Precision Panel Frame for instal-
lation, see pg. 68
PSP12 12-PAIR SPEAKER
PRECISION PANEL
PSP12 Dimensions
Wall Cutout . . . . . . . . (in.) 8 W x 10-1/2 H
. . . . . . . . . . . . . . . (mm) 204 W x 267 H
Installed w / frame . . . . . (in.) 9-3/4 W x 12 H
. . . . . . . . . . . . . . . (mm) 248 W x 305 H
PSP6 requires PF2 Frame, see pg. 68
ORDER NO. PSP6