Specifications

©2011 ELAN HOME SYSTEMS • CARLSBAD, CA USA • ALL RIGHTS RESERVED
66
General Products
ELAN
®
SENSE AUTOMATION SENSORS
Seven ways to add reliable power management and
automation features to any system!
ELAN
®
SENSE Automation Sensors detect audio and video signals, as well as transi-
tions in voltage, current, contact closures and light, adding advanced functionality to
ELAN multi-room systems. When combined with an ELAN g! Home Controller, M86A
S128P, S86P/A, SR1 or SS1, ELAN sensors become extremely powerful automation
tools, providing “if / then / else” logic capabilities for power management and trig-
gered events. Adjustable sensitivity and delay on most models make it easy to fine
tune sensor activation for specific applications.
Detects composite video
signals. Female-to-male RCA
adaptor connects in-line
between the component (Y,
Pr, or Pb) or composite video
output of any source or its
destination. Features adjust-
able sensitivity and delay.
Detects AC current in power cords, as
well as the AC magnetic fields generated
by motors, transformers, TV’s, etc. The
CRSENSOR has a unique clamping device
that accommodates a wide variety of
different sized AC power cords. The base
of the clamping device is removable
when magnetic field detection is desired.
Features adjustable sensitivity and delay.
AUDIO SENSOR
ORDER NO. AUDSENSOR
CONTACT CLOSURE SENSOR
ORDER NO. CTSENSOR
LIGHT/LED SENSOR
ORDER NO. LTSENSOR
Detects AC or DC voltage from
9-24 Volts. A two-terminal
barrier strip is used to connect
voltage + and – conductors.
Perfect for use with the HC Series
or multi-room controller, SS1
or SR1.
VOLTAGE SENSOR
ORDER NO. VTSENSOR
CURRENT/MAGNETIC FIELD SENSOR
ORDER NO. CRSENSOR
Detects line-level audio. Female-
to-male RCA adaptor connects
in-line between either the left or
right line-level audio output of
any source and an A/V controller
or receiver. Features adjustable
sensitivity and delay.
Detects TOSLINK (optional) sig-
nals, LEDs and even the displays
of many A/V components. Red
and Green filters (included) allow
for the detection of bi-color LEDs
found on many components.
Features adjustable sensitivity
and delay.
Detects dry contact relay
closures. A two-terminal bar-
rier strip is used to connect +
and – conductors from relay
devices. Ideal for use with
any HC Series or multi-room
controller, SS1 or SR1.
VIDEO SENSOR
ORDER NO. VIDSENSOR