Specifications

ManualsBrandsElan ManualsComputer equipmentOE525

IR Systems

For basic IR repeating systems, this one-input by

two-output Passive IR Connection Block provides

a quick and easy means for connecting an ELAN IR

Sensor and two IR Emitters. Current-sharing resis-

tors at each emitter jack allow any combination of

single- or dual-emitters to be used. The STATUS

input jack allows you to monitor the ON / OFF

condition of systems components (PWR2 Power

Supply required for status feedback).

IRD2 PASSIVE IR

CONNECTION BLOCK

IRD4 AMPLIFIED IR

DISTRIBUTION BLOCK

For use with the IRD4, this simple-to-use emitter

expansion block allows you to expand the number

of IR output ports in any system. Connecting the

IRD10 to the high output emitter port of an IRD4

Amplified IR Distribution Block allows you to add

up to ten additional IR emitters per IRD10 to the

system for source control. The IR high-output loop

port of the IRD10 allows you to add up to four ad-

ditional IRD10s for a total of 50 emitters. The IRD10

even comes with a one-foot interconnect cable for

quick and easy connection.

FEATURES

 Connects a single IR output to up to 10 IR

Emitters

 Add more Emitters to an IRD4 Amplified IR

Connection Block

 Ideal for expanding ELAN IR “ALL”Port

capabilities

 Link up to five IRD10s using the high-output

loop port

 1-foot 3.5 mm “mini”plug interconnect

cable (incl.)

 Non-retail packaging

FEATURES

 Quick & easy connection for 1 ELAN IR Sensor

& 2 ELAN IR Emitters

 Great for basic IR repeater systems

 STATUS input jack tells if system is ON or OFF

 Quad “mini” plug-to-mono “mini” plug cable for

ELAN controller IR output port applications (incl.)

 Strong adhesive backing for mounting on any

flat surface

 Non-retail packaging

IR DISTRIBUTION

Sensors “receive” IR data. Emitters “transmit” IR

data. So how does one get this data from point

A to point B? Quite easily, actually. In addition to

offering a complete line of multi-room controllers

that route IR to and from any room in the house,

ELAN offers a line of stand-alone IR Distribution

blocks for use in any stand alone application.

The ELAN IRD4 is the heart of any stand-alone IR

distribution system. This amplified IR distribution block

can connect quad-plug or bare-lead ELAN IR Sensors

in one or more rooms and output their signals to up to

four IR emitters. The IRD4’s robust, wide-bandwidth

amplifier incorporates reverse voltage protection so

that it has the ability to drive both miniature and

high-output emitters simultaneously. And the IRD4 is

expandable! Up to ten IRD4s can be linked together to

create a distributed IR system that encompasses every

room in the house.

Note: only 3.5 mm quad “mini” plugs can be

connected to the 3.5 mm IR Sensor input jack of

the IRD2. If the IRD2 is to be connected to the

IR output of any other ELAN product, use only

the 3.5 mm quad-to-mono interconnect cable

included with the IRD2.

Note: only 3.5 mm quad “mini” plugs can be

connected to the 3.5 mm IR Sensor input jack of

the IRD4. If the IRD4 is to be connected to the IR

output of any other ELAN product, use only the

3.5 mm quad-to-mono interconnect cable included

with the IRD4.

ORDER NO. IRD2

IRD10 PASSIVE IR EMITTER

EXPANSION BLOCK

ORDER NO. IRD10

ORDER NO. IRD4

FEATURES

 1 box–everything you need!

 Kit includes:

• (1) IRS5 CFL friendly tabletop IR Sensor

• (4) IRE2 “talk back” IR Emitters

• (4) IR Emitter Shields

• (1) IRD4 Amplified IR Distribution Block

• (1) Quad “mini”plug-to-mono “mini” plug

cable for ELAN controller IR output port

applications

• (1) PWR2 12VDC / 200mA Power Supply

Full-color retail box standard

With full-color retail packaging standard, the

IRDKIT is the ideal off-the-shelf product for con-

sumers who like to “do-it-themselves”. The IRDKIT

contains everything needed for a basic IR repeater

system – a tabletop IR sensor, four IR emitters

and the IRD4 Amplified IR Distribution Block with

power supply.

IRDKIT IR DISTRIBUTION KIT

ORDER NO. IRDKIT

FEATURES

 Amplified hub for stand-alone IR distribution

systems

 Easy connection of both quad-plug & bare-lead

ELAN IR Sensors

 4 output jacks handle both high- & low-output

IR emitters

 Expandable! Link up to 10 IRD4s together for

large systems

 Mounts on any flat surface (mounting screws incl.)

 Quad-to-mono “mini” plug cable incl. for ELAN

controller applications

 Requires PWR2 or PWR3 Power Supply,

depending on scope of system

 Full-color retail box