Specifications

©2011 ELAN HOME SYSTEMS • CARLSBAD, CA USA • ALL RIGHTS RESERVED
Lighting Control
45
This great little package enables you to initially set up your lighting
system and allow you to control 4 lighting zones in main areas in
your home.
The keypads and wall switches are pre-programmed with 4 basic
scenes. Spending less time on programming will allow you to start
enjoying your ELAN Lighting system sooner. Changing the existing
scenes are as simple as activating the scene, changing the lighting
levels at the wall switches and tapping the scene button on the
keypad five times. The Keypads can also receive IR commands to
give you control from any learning remote.
KIT INCLUDES
(4) WS1D6W
(1) KPCW6W
(1) PIMR
(1) PPC1
4-ZONE STARTER KIT
The Timed Event Controller is a high quality plug-in
home automation controller capable of transmitting
and receiving digital commands over the existing
powerlines at preset times.
The TEC stores up to 20 individual timed events. Each
event can be configured to occur, daily, during the
work week, on weekends, on specific days of the week
or on a specific day of the year. Event times can be
specified as absolute times or relative to sunrise or
sunset times (based on your geographic location). A
Security Mode to randomly vary the event time each
day within a user specified time window gives the
home a lived in look.
TIMED EVENT CONTROLLER
TIMED EVENT CONTROLLER ORDER NO. TEC
FEATURES
 Stores up to 20 individual times events
 Security mode allows for random events
 Automatic Daylight Savings adjustment
 10-year batteryback-up
The Input Control Module is a high quality plug-in
home automation controller device designed to
interface off-the-shelf low voltage or contact closure
sensor devices. It provides two independent channels
of general purpose isolated contact closure sensing
inputs to activate single lights, trigger dramatic scenes,
or send messages to a central controller.
INPUT CONTROL MODULE
INPUT CONTROL MODULE ORDER NO. ICM
FEATURES
 Quick and easy installation: simply plug the ICM
into any standard wall outlet and wire the device to
the sensor.
 Perfect for interfacing off-the-shelf motion sensors,
light sensors, occupancy sensors, pressure mats, RF
remote controls, etc
INSTALLATION & SUPPORT DEVICES continued
4 -ZONE STARTER KIT ORDER NO. SPK4