Specifications

ManualsBrandsElan ManualsComputer equipmentOE525

Lighting Control

DIMMERS & SWITCHES

These dimmers replace existing switches or

dimmers providing controlled lighting without new

wires. The dimmers are compatible with incandes-

cent, dimmable CFL, inductive and magnetic low

voltage loads. Configured as a switch this device

will switch standard fluorescent, electronic low

voltage and relay loads. Available in wattages up

to 2400 watts, our dimmers are one of the very

few to dim over 1000 watts without an external

interface. Each device can be a member of 16

scenes and act as a simple two button controller

FEATURES

 Each unit can be a dimmer, a relay switch or a two-

button transmitter depending on its programming.

 May be used for stand-alone scene lighting control,

or with a controller

 Pre-programmed with 7 preset scenes

 Variable fade rates for rocker switch operation and all

scenes can be set between instant–on and one hour

STANDARD DIMMERS

USE ORDER NO. PLUS COLOR CODE

STANDARD DIMMER, 600W ORDER NO. WS1D6

STANDARD DIMMER, 1000W ORDER NO. WS1D10

STANDARD DIMMER, 1500W ORDER NO. WS1D15

STANDARD DIMMER, 2400W ORDER NO. WS1D24

ELECTRONIC LV DIMMER, 300W ORDER NO. WS1E3

ELECTRONIC LV DIMMER, 500W ORDER NO. WS1E5

SEE NOTE*

LAMP & APPLIANCE MODULES

LAMP MODULE, 400W ORDER NO. LM14

APPLIANCE MODULE, 12A ORDER NO. AM112

The Lamp and Appliance Modules are perfect for

remotely controlling one or more plug-in lamps and

appliances. Simply plug the item to be controlled into

the controlled outlet on the bottom of the module and

then plug the module in the wall. A pass-through

outlet allows plugging in other items that do not

require remote control.

The LM14 Lamp Module is designed for controlling

incandescent, fluorescent or magnetic low voltage

loads, and provides as much as 400W of power to the

lamp(s). The dimmer function can also be disabled,

turning the outlets into a switch, allowing on/off

commands to non-dimmable loads such as fans or

radios. The AM112 Appliance Module will handle up

to 12 Amps for ON/OFF control.

The FMD24 2-Channel Fixture Module Dimmer is the

ideal solution to controlling incandescent lights or

fixtures that need to be individually controlled or are

not currently wired to a dedicated wall switch location.

The FMR120 ideal solution for fluorescent lights,

or other non-dimming loads (such as motors or

transformers), that need to be individually controlled

but are not currently wired to a dedicated wall switch

location.

FIXTURE MODULES

FIXTURE MODULE DIMMER ORDER NO. FMD24

FIXTURE RELAY MODULE, 20A ORDER NO. FMR120

FEATURES

 Auto-off timer and transmit function allows the unit

to turn off after a pre-set time from 1 minute to

4 hours from being turned on

 Switch trigger circuits allow the modules to turn on

when the controlled device’s on/off switch is opened

and then closed and can update its status to other

devices – great feature for reading lamps when you

don’t want to have to find a controller to turn the

lamp on

 Transmission mode allows the modules to trigger

scenes when they are manually turned on or upon

the Auto-off time-out setting

 Pre-programmed with 7 preset scenes to create

inviting moods and a flash feature for notificatio

 Programmable on-level with 100 Dimming Steps for

elegant scene membership and notification of status

 Auto off timer allows the unit to turn off after a

pre-set time from 1 minute to 4 hours

 Multi-colored LED to show status of load

 May be used in three-way circuits just add an RWS

Remote Wall Switch

 Electronic Low Voltage (ELV)dimmers are compatible

with and required for ELV transformers

 Adjustable Receive Sensitivity to maximize

communication reliability

 * NOTE: Available in 7 colors, except 1500W and

2400W models, which are available in ivory and

white only.

FEATURES

 Wires into electrical box or fixture canopy

 Controllable by an ELAN lighting controller

 Allows automation of ceiling fan / light locations