Specifications

©2013 ELAN • pEtALumA, CA uSA • ALL RightS RESERvEd
43
General Products
PRECISION PANELS
PPWM
HEAD-END I/O
PRECISION PANEL
ORDER NO. PPWM
 Connection point for rack-mount controller
(HC6 / HC12)
 Provides connection point to IR outputs 7 -12
 Connects to PPIR, PPRM and PPIS
 Must use PF2 Mounting Frame (see this page)
PF2 PRECISION
PANEL FRAME
ORDER NO. PF2
 Frame & insert for installing two half-frame
Precision Panels
 Blank half-frame plate & mounting screws (incl.)
 PBKT6P Rough-In Brackets avail in pkgs of 6
 The PF2 is required for the installation of all
half-frame Precision Panels
Dimensions
Wall Cutout
(in.) 8 W x 10-1/2 H
(mm) 204 W x 267 H
Installed w / Frame
(in.) 9-3/4 W x 12 H
(mm) 248 W x 305 H
HC4BKT HC4 BRACKET
ORDER NO. HC4BKT
 Easy and clean mounting for the HC4 System
Controller.
 Fits ELAN Enclosures
PPSP POWER DISTRIBUTION
WALL PLATE
PPVN VIA!NET DISTRIBUTION
WALL PLATE
 Provides Power to Four TS2L’s
 Provides Connection for IR from Four TS2L’s
 Includes 16v Power Supply
 Single-gang Decora® design
PPRM ROOM IR OUT/SENSE
RELAY WALL PLATE
 Connection point to distributer IR, sensor,
relay, and serial or network
 Requires 2 Cat-5e to utilize all capabilities
 Easiest way to get connections from PPWM
 Single-gang Decora® design
ORDER NO. PPSP
 Supplies power for 3 (with PWR1)
or 8 (with PWR4) in-wall panels
 PWR1 or PWR4 sold separately
 Single-gang Decora® design
ORDER NO. PPVN
ORDER NO. PPRM
PPIR ROOM IR TERMINATION
WALL PLATE
ORDER NO. PPIR
 IR sensor connection point
 Serial or Ethernet pass-through
 2 Cat-5e required for IR sensor and
RS-232/Ethernet use
 Single-gang Decora® design