Specifications

COM2 Communications Controller ELAN HOME SYSTEMS
B-8 © ELAN Home Systems 2007 • All rights reserved.
To install the DSS3 Door Station:
1) Using the surface bracket as a template, mark and drill the four corner holes. Insert a
wall anchor in to each hole.
2) Attach the surface bracket using the four surface mounting screws.
NOTE: Make sure to make your electrical connections prior to mounting the door
station.
3) Connect DS + and DS - using a butt splice or other appropriate connector.
4) Mount the door station to the surface bracket, as illustrated in Figure B-8. Note the
orientation of the Mounting Plate flanges.
Figure B-8: Mounting the DSS3 Door Station