Specifications

COM2 Communications Controller ELAN HOME SYSTEMS
B-4 © ELAN Home Systems 2007 • All rights reserved.
Locate and adjust the DIP switches to indicate the desired door station for your location, i.e.,
front door = Door Station 1, back door = Door Station 2 etc. (see Figure B-3).
Figure B-3: DIP Switch Locations
VBRM Video Balun
The DSC3 Door Station with Color Camera requires the use of ELAN’s VBRM Video Balun
(included) to properly pass video thru Cat-5 network cable at any significant distances.
Figure 3-8 and Figure 3-9 shows the wiring connections using Cat-5 network cable.
Figure B-4 shows the connections for the VBRM Video Balun.
1+
#2#!
 
 
$3
2,

#(/
26(3"'$2
#2%Ø.1Ø#22
#2"
VID-
VID+
4 3 2 5 1
DS- DS+ GND
7
6 8
PWR
DS+ DS-
5VID-
DS+
DS-
VID+
8
7
6
PWR
GND
DS+
DS-
3
4
2
1
CONNECTED
TO DSC3
DOOR STATION
NOTE: Installer can use either the
Quick Lock Connector for runs from
0-1000 feet, or the RJ45 Connector
for runs from 0-500 feet to connect
the DSC3 with camera, but not both.
CONNECTED TO
DSC3 DOOR STATION
PWR3 PS INPUT
JACK
(12VDC 1.5 Amp)
QUICK LOCK
CONNECTOR
VBRM VIDEO BALUN
RJ45
CONNECTOR
VIDEO
OUTPUT
OUT
TO COM2
Quick Lock connection
used for runs up to
1000 feet.
RJ45 connection
used for runs up to
500 feet.