Specifications

COM2 Communications Controller ELAN HOME SYSTEMS
B-2 © ELAN Home Systems 2007 • All rights reserved.
Specifications
Table B-1 provides the DS Series Door Station Specifications.
PreWiring & Installing The Door Stations
The DSF3 and DSS3 Door Stations require two conductors to achieve full functionality. The
DSC3 requires six conductors in order to utilize the camera functionality eight for long runs
(over 500 feet). Cat-5 network cable is recommended in each instance. Route Cat-5 from the
head-end location to each Door Station location, avoiding sharp angles.
To physically mount DSF3 and DSC3 Door Stations, use an ELAN DBK1000 Rough-In Bracket
during construction. The DSS3 Door Station is designed to be surface mounted and utilizes
four wall anchors and screw.
Table B-1 Specifications
Item Description
Door Station
Speaker 8 ohm, sealed back mylar cone
Microphone Hi-gain omni-directional condenser
Door Latch Relay 12VDC coil, 2A contact rating
Wiring Requirements Cat-5, 1000ft max
DSC3 Color Camera Specifications
Imager 1/3 in. CCD
Auto Iris 1/50-1/100,000 sec.
Lux .05 min.
Resolution 480 Horizontal Lines
Horiz. Viewing Angle 120°
Vert. Viewing Angle 100°
Swivel +15°/-15° left to right
Video Output 1V peak-to-peak
Video Output Impedance 75 Ohms
Power Requirements 12VDC @ 130 mA