Specifications

ELAN HOME SYSTEMS COM2 Communications Controller
© ELAN Home Systems 2007 • All rights reserved. A-1
Appendix A: Specifications
Table A-1 COM2 Communications Controller Specifications
Item Description
Power Requirements
Home phone battery voltage
120V, 60Hz, 25W
48VDC
Relay Type
Current Limit
NO/NC dry contact
4A
Music-On-Hold Adjustment Range Muted to +6dB.
(MOH suggested input level is between -10dBv and 0dBv)
Page/Door Chime Range (Mono,
Line Level)
Muted to +6dB
Volume Control Override (VCO)
Internal Power Supply 1A, 12VDC
Trigger Inputs (2) Current limited + 12VDC Output
(connect to dry closure only)
Connector Interfaces
AC Power
VIA!NET IN/OUT
Trigger Output
Trigger Input
Relay/VCO Connections
Relay/VC Power
Audio Loop In/Out
Music On-Hold (MOH IN)
Door Station Bus
Phone Out (2-Line)
TELCO In (2-Line)
3-Prong Heavy Duty Power Cord
RJ-45
3.5mm Connectors
Removable Locking Connectors
Removable Locking Connectors
Removable Locking Connectors
RCA Type, Line Level Only
RCA Type, Line Level Only
Removable Locking Connectors
RJ-14
RJ-14
Door Station Bus
Mic /Speaker max gain +9dB Boost
Recommended Wire
Doors Station Assembly
RJ-45 interface (VIA!Net)
RJ-14 “Telco” interface
Cat-5 Communications Wire or 2-conductor “bell” wire
Cat-5 Communications Wire
Cat-5 Communications Wire
Dimensions (HxWxD)
Freestanding Model
Rackmount Model
2.25 x 17.00 x 12.50 inches
5.72 x 43.18 x 31.75 cm
1.75 x 19.00 x 12.50 inches
4.44 x 48.26 x 31.75 cm