Specifications

COM2 Communications Controller ELAN HOME SYSTEMS
3-14 © ELAN Home Systems 2007 • All rights reserved.
Standalone Connections ( Without an ELAN Multi-
Room Controller
)
Pre-Amp/Amp
Use stereo RCA patch cables to connect the COM2’s AUDIO LOOP IN to the Pre-Amp’s Main
Outputs as shown. Connect the AUDIO LOOP OUT jacks to the Power Amp’s Main Inputs. This
allows the COM2’s Page and Doorbell signals to be heard through the speakers connected to
the power amplifier.
Figure 3-18 COM2 to a Pre-Amp/Power Amp Stereo System
Receiver Based System
Use stereo RCA patch cables to connect the COM2’s AUDIO LOOP IN to the Receiver’s Main
Outputs as shown. Connect the AUDIO LOOP OUT jacks to the Receiver’s Main Inputs. This
allows the COM2’s Page and Doorbell signals to be heard through the speakers connected to
the receiver.
Figure 3-19 COM2 to a Stereo Receiver Pre-Out Main-In Jacks
PRE-AMP MAIN OUTPUTS
L R
L R
POWER AMP INPUTS
AUDIO LOOP
R
L
IN OUT
PG/DB OUT
MOH IN
(MONO)
2SDQDNØ1DBDHUDQØØØØØØØØØØØ
!5$)/,//0
2
,
). /54
0'$"/54
-/().
-/./
,@HMØ(M
+ØØØØØØØ1
/QDØ.TS
+ØØØØØØØ1