Specifications

ELAN HOME SYSTEMS COM2 Communications Controller
© ELAN Home Systems 2007 • All rights reserved. 3-7
Figure 3-10 COM2 to DSF3 or DSS3 Door Station Wiring Pinout
COM2 to Trigger Inputs
The COM2 provides Cat-5 connections for basic two-wire doorbells or devices such as
driveway, motion or contact sensors, which can trigger door chimes or alerts and play them
over the house speakers.
Connect “+” and “-” from the triggering device to “+” and “-” of the TRIGGER INPUTS
connector as shown.
Figure 3-11 COM2 to Trigger Inputs Pinout
NOTE: Trigger inputs 1 and 2 will always trigger the door chime assigned to Door
Station 1 and Door Station 2 respectively. Chimes can be changed to suit a
particular need.
Cat-5
DSF3 or DSS3
DOOR STATION
White/Blue
Orange
White/Orange
Green
White/Green
Brown
White/Brown
Blue
Green
White
Red
Black
1RL2
-DS+
Blue
White/Blue
Orange
White/Orange
Green
White/Green
Brown
White/Brown
Butt Splice
DS -
DS+
To 110V AC
ELECTRONIC DOOR LATCH
RELEASE MECHANISM
DOOR LATCH
POWER SUPPLY
+
-
Door Station
Bus
+
-
-
+
COM2
BLUE
WHITE/BLUE
ORANGE
WHITE/ORANGE
GREEN
WHITE/GREEN
BROWN
WHITE/BROWN
1
2
3
4
5
6
7
8
PIN # COLOR CODE
FRONT
CABLE
Standard ELAN RJ-45 Pin-Out
TAB
MOTION SENSORS DRIVEWAY SENSORS DOORBELL
COM2
1
2