Specifications

ELAN HOME SYSTEMS COM2 Communications Controller
© ELAN Home Systems 2007 • All rights reserved. 3-3
COM2 Trigger Outputs
The Trigger Output choices are SUM, PG, DB1 and DB2. See Table 3-1.
CAUTION: ALWAYS remove power to the COM2 along with any other
electronics equipment prior to making any connections to or from the
COM2. Set the Power Switch on the back of the COM2 to the OFF
position prior to making connections.
Figure 3-4 COM2 Trigger Outputs
Table 3-1 COM2 Trigger Outputs
Trigger Output Description
SUM Activates when page and doorbell occurs. Use SUM if
you want music to mute and the page/doorbell audio to
be heard over the house speakers. SUM is used to trigger
the page/doorbell input of an ELAN controller, such as a
System6, System12 or Z•630.
PG Activates only when a page occurs. Use PG if you want
trigger automated events when a page is initiated, see
Figure 3-22 and Figure 3-26 for applications.
DB1 Activates when doorbell from Door Station 1 is pressed.
Use DB1 if you want trigger automated events when the
doorbell from Door Station 1 is pressed, see Figure 3-22
and Figure 3-26 for applications.
DB2 Activates when doorbell from Door Station 2 is pressed.
Use DB2 if you want trigger automated events when the
doorbell from Door Station 2 is pressed, see Figure 3-22
and Figure 3-26 for applications.
0/7%2
/540543
$" $"
   

).0543
6)!.%4
/54
).
4!,490%
&53%
2%0,!#%
7)4(3!-%
490%!.$
2!4).'/.,9
35- 0'
6!#
(:
W
42)''%23
".,
ØØØØØØØ$+ -Ø,4+3(1..,Ø".-31.++$1
/@FDØ3QHFFDQØ(M