LED PENDANT MODEL #83621 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS B A D E C PART A B C D E DESCRIPTION Canopy Mounting Bracket LED Assembly Compression Fitting Cable 2 QUANTITY 1 1 1 3 3
HARDWARE CONTENTS AA BB Wire Connector Short Qty: 3 Machine Screw Qty: 2 CC Canopy Screw Qty: 4 DD EE FF Washer Qty: 4 Anchor Qty: 4 Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1. The hanging length of the cable (E) for this fixture is adjustable.
ASSEMBLY INSTRUCTIONS 3. Orient the mounting bracket (B) so that the arms are facing away from the outlet box (not included). Connect the mounting bracket (B) to the outlet box with short machine screws (BB). 3 Outlet Box Hardware Used BB Short Machine Screw x2 BB B Arm 4. Screw anchor screws (FF) through mounting bracket (B) and into anchors (EE). 4 EE Hardware Used Anchor FF Screws x4 B FF 5. Connect safety cable located in canopy (A) to the safety cable loop located on mounting bracket (B).
ASSEMBLY INSTRUCTIONS 6. Wire connection guide: Ground wire: 6 • For installation in the United States: Wrap ground wire from outlet box around ground screw preaqssembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 1. Check wiring.
WARRANTY (continued) This warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, connected to voltage at more than 5% above standard North American voltage, unusual use (including but not limited to use in an environment where the annual average ambient operating temperature is below 27 or above 95 degrees Fahrenheit), neglect (including but not limited to improper maintenance), accident, acts of god such as high winds, improper installation or care, failure
LUMINAIRE SUSPENDU À DEL MODÈLE #83621 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A D E C PIÈCE A B C D E DESCRIPTION Pavillon Support de fixation Ensemble DEL Raccord à compression Câble 10 QUANTITÉ 1 1 1 3 3
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courtes Qté : 2 CC Vis du pavillon Qté : 4 DD EE FF Rondelle Qté : 4 Pièce d’ancrage Vis à pièce d’ancrage Qté : 4 Qté : 4 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité.
PREPARATION Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les pièces. Comparez les pièces dans l’emballage avec la liste du contenu. S’il y a des pièces manquantes ou endommagées, ne tentez pas d’assembler le produit. Temps d’assemblage approximatif : de 30 à 60 minutes Outils requis pour l’assemblage (non fournis) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder, ruban isolant, échelle, lunettes de sécurité. INSTRUCTIONS POUR L'ASSEMBLAGE 1.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Orientez le support de fixation (B) de sorte que les bras soient dirigés à l'opposé de la boîte de sortie (non fournie). Fixez le support de fixation (B) à la boîte de sortie à l'aide des vis à métaux courtes (BB). 3 Boîte de sortie Quincaillerie utilisée BB Vis à métaux courtes x2 BB B Bras 4. Vissez les vis d'ancrage (FF) à travers le support de fixation (B) et dans les ancrages (EE). Quincaillerie utilisée Vis à pièce FF d’ancrage 4 EE B x4 5.
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Guide de raccordement électrique 6 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (EE) située sur le support de fixation (DD), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (EE).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas. CAUSE POSSIBLE 1. Le luminaire est mal branché. MESURE CORRECTIVE 1. Vérifiez si le luminaire est bien branché.
GARANTIE (suite) Cette garantie ne s'applique pas aux produits qui ont été soumis à un usage abusif, une manipulation inadéquate, un usage impropre, qui ont été connectés à un voltage de plus de 5 % supérieur au voltage nord américain, qui ont subi un usage inhabituel (y compris mais sans s'y limiter un usage dans un environnement où la température ambiante moyenne annuelle est inférieure à 27 °F [-2,8 °C] ou supérieure à 95 °F [35 °C]), la négligence (y compris mais sans s'y limiter un mauvais entretien),