Installation Guide

ASSEMBLY INSTRUCTIONS

SAFETY INFORMATION

CAUTION

• Read and understand all instructions and illustrations completely before proceeding with assembly

and installation of this fixture.

• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate

completely, please contact a licensed electrical contractor.

• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts

out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate

the ETL listing and/or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated assembly time: 30 minutes to 1 hour

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,

electrical tape, ladder, safety glasses, drill and 9/32 drill bit.

1. The hanging length of the cable (D) for this

fixture is adjustable. Hold the fixture canopy

(A) up against the ceiling to determine the

desired length before the entire fixture is

assembled.

The cable (D) is held in place by a

compression fitting (E). Push up, and hold,

the fitting’s spring loaded tube (E) to release

the cable (D) for adjustment.

1b1a