User guide
Table Of Contents
- 1 OVERVIEW
- 2 ABOUT THE USBscope50
- 2.1 General
- 2.2 USBscope50 Architecture
- 2.3 Using More Than One USBscope50
- 2.4 Input Ranges
- 2.5 Probe Compensation
- 2.6 Acquisition Modes
- 2.7 Trigger Modes
- 2.8 Trigger Position
- 2.9 Trigger Threshold
- 2.10 Data manipulation
- 2.11 Import Graph Data
- 2.12 Software Development Kit (SDK) for USBscope50
- 3 SOFTWARE INSTALLATION
- 4 HARDWARE SPECIFICATION
2.11 Import Graph Data
Any text file with the header of exported file and 3000 points can be
imported on the graph. Select Edit → Import Graph Data and these
data points will appear on the channel set in the file header DATA
On CHANNEL. When you select a text file to import, software will
scan through it and will warn you if any of the header settings are
missing, and also will point out the line number where error
encountered.
All lines beginning with “//” in the text file will be ignored by
software. Use this if you wish to write comments or not include
certain data points on the graph.
Elan Digital Systems Ltd. 26 USBscope50 USER’S GUIDE Iss8