Specifications

ELAN AUDIO - SENTINEL / RCU-01 RCU01R02 PAGE 4/49

2. Packing List

SENTINEL Software package;

• SENTINEL Owners Manual

• SENTINEL installation CD

For each RCU-01;

• SENTINEL Owners Manual

• One miniature XLR inline female connector for battery

• One miniature XLR inline male connector for DC out

• One DC Plug 1.3mm pin line for modem DC power

• One mains lead

3. SENTINEL System Specifications

A summary of the features the SENTINEL system provides;

• Opto isolated digital inputs with 12 character descriptions, alarm capability for active or inactive state, change

of state event logging.

• 16 Status LED’s on RCU front panel assignable to any of the 24 inputs.

• 16 relay outputs with floating contacts at 1amp, 12 character descriptions, momentary or latching operation

with re-assurance of operation.

• analog inputs, 8 bit, 0 to 10V, 12 character descriptions, 8 character units descriptors, scaled values, positive

or negative, alarm thresholds high and low, or reversed for window alarm, logging of crossing alarm

thresholds at 1 second scan rate.

• 99 log event capacity, alarm when event threshold breached. (RCU)

• Adjustable event alarm threshold. (SENTINEL)

• 99 alarm queuing capacity. (RCU)

• Mains sensing as an effective 25

input.

• Download, upload, edit and copy of site configurations.

• Printable reports of Site Configurations and Alarms.

• Alarm paging to Digital MobileNET SMS, individually assignable on a per site basis.

• Informative front panel display on RCU.

• RCU front panel control of relays.

• LOCAL mode key switch on RCU to isolate unit from operation by Control site for personnel safety.

• Alarm generation disabled in LOCAL mode. (RCU)

• Multiple modes of communications from Host to Remote.

• RCU unit provides battery backup for itself and modem/transceiver by external battery. Charger built in.

• All RCU configuration information saved in non-volatile memory.

• Internal RCU clock backed up from internal battery. (Lithium cell in holder).

Power Requirements;

• Mains 230 to 250VAC 50Hz, Maximum 40W

DC Power Consumption from 12VDC battery;

• With no modem, 130mA

• With modem idle, 230mA

• With modem active, 500mA

• With no modem and all Output relays on, 800mA

Battery Charger;

• Charging Current; 700mA max

• Battery float voltage, 14V