Specifications

Uni-Fi Reference UFR52 Floorstanding Speakers
New Concentric Driver with Cast Chassis
A wide-surround tweeter enhances it’s low and high
frequency extension allowing
for improved blending with the
midrange. An entirely new
midrange driver with large
diameter voicecoil, vented rear
spider and new neodymium
magnet allows for better
excursion and control of midrange frequencies. A new
cast chassis was designed to minimize reflections back
to the cone resulting in better clarity.
UNI-FI REFERENCE SERIES FEATURES
Newly developed 5.25” Aluminum Woofer with Cast
Chassis
Drastically improving low-end
reproduction, this newly developed
bass driver features a single piece
compound curvature aluminum
cone with a large rear vented
magnet delivering improved
linearity and better low frequency
response of any previous Uni-Fi
floorstanding speaker.
Full Perimeter Bracing
Reducing the speaker cabinets influence on the audio
quality the Uni-Fi reference line implements full
perimeter bracing significantly reducing cabinet
vibration and cabinet coloration.
Dual Flared Slot Vents
Our newly developed slot vents utilized both internal
and external flares allowing for lower noise and high
bass output for improved low frequency dynamics.
SPEAKER TYPE 3-Way Bass Reflex
FREQUENCY RESPONSE 40Hz—35000Hz
NOMINAL IMPEDANCE 6 Ohms
SENSITIVITY 86db
CROSSOVER FREQUENCY 220 / 1800Hz
MAXIMUM POWER INPUT 140 WaƩs
TWEETER 1” SoŌ Dome
MIDRANGE 4” Aluminum
WOOFERS 3 x 5.25” Aluminum
CABINET CARB2 Rated MDF
PORTS Dual Flared Slot / Dual Flared
BINDING POSTS Bi-Wire 5-Way
DIMENSIONS (WxHxD) 7.28” x 39.18” x 13.31”
NET WEIGHT 52.36 lbs
CABINET FINISH SaƟn White with Oak Sides
or
SaƟn Black with Walnut Sides
UFR52-BK/W SPECIFICATIONS
ELAC.com
©2021 ELAC Americas, Inc. All rights reserved. Specifications and design subject to change without notice.