Datasheet

2
• Due to the double flare design of the bass port, flow noise, even
at high levels, is eliminated.
• A two-part bass
control plug is
provided that can
partially or fully close
the port, so the
system can be
adjusted for the room
acoustics and
speaker placement.
• To optimise the sound there are individual crossover networks for the high and low frequencies,
which can be bi-wired using two pairs of cable or alternatively, for optimum performance, two am-
plifiers can be used in a bi-amped situation. Good contact is guaranteed by large, gold plated
speaker terminals, which are fully insulated to protect against short circuits. The crossover net-
work is equipped with an overload protection circuit.
Finishes: silver, titan, cherry, black
Specifications ELAC CC 121
Dimensions H x W x D 175 x 435 x 270(285) mm Crossover frequency 550/2500 Hz
Weight 8.2 kg Nominal / Peak Power
Handling
80 W/120 W
Type 2 1/2 way, bass reflex Frequency Range 44-25000 Hz
Woofer 2 x 140 mm AS cone, magn.
shielded
Sensitivity 89 dB/2.8V/m
Tweeter 1 x HT 25 KST V, magn. shielded Nominal impedance 4 ohm
Midrange Minimum impedance 3.6 ohm at 190 Hz
Recom. Amplifier Power
at Nominal Impedance
30-180 W/channel