Technical Specifications

22"
18"
9"
10½"
3½"
DRAIN OPENING
1½"
11"
2218 Undermount or
Top Mount Utility Sink
General: Furnish and install as shown on plans, an Undermount
sink model 2218 as manufactured by E. L. Mustee & Sons, Inc.
Material composition shall be molded fi berglass, using matched
metal molds under extreme heat and pressure. One-piece,
seamless construction with self-rimming edge for Undermount or
top mount installation. Shall meet ANSI Specifi cation Z 124-2017.
Overall size 18" length x 22" width x 11" depth, weight 16 lbs.,
Color: White.
Dimension
Length
Width
Depth
Overall
18"
22"
11"
Model No.
Color
UPC
2218
White
6 71031 00522 9
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
Code Accepted
Mustee utility sinks meet or exceed performance requirements:
 International Association of Plumbing and Mechanical Offi cials (IAPMO)
®
Listed
 American National Standards Institute (ANSI)—Specifi cation Z 124-2017
Design features:
 Mustee’s premium, high grade VARISTONE™ fi berglass
 One piece molded with matched metal molds
 Semi-gloss, scratch & stain resistant
 Drain opening for standard 3 ½" basket strainer (not included)
 Accommodates any faucet, soap dispenser and more that can be
surface mounted to the counter top
 Color: White
 Template included for undermount and top mount installation
Specifi cations
Undermount Cut Out – 15" x 19" with round corners
Drop In Cut Out – 15 ½" x 19 ½"
See template included with sink for exact measurements