Operation Manual
5
HEARTBEAT READINGS
Besides Systolic and Diastolic values, your pulse rate will also be
displayed after a measurement.
Pulse
User setting
This unit allows the measurement records of a maximum of 4 users to be stored in dierent
user pages. Press ”PAGEt” button to switch between user page 1, 2, 3 and 4.
Making a measurement
1. Press the “ ” button. The cu will automatically inate and the measurement will start.
2. When the measurement is complete, the cu will automatically deate and your systolic
and diastolic pressure values and pulse rate will be displayed.
3. Remove the arm cu and take note of your measurement results.
Note:
You can press the “ ” button to stop measurement at any time
Regular but BELOW normal heartbeat
If the monitor detects a pulse rate below 100 beats per
minute during measurement, the unit will display the
pulse value and “LO” symbol alternately.
Example: (58/LO)
Regular but ABOVE normal Heartbeat
If the monitor detects a pulse rate above 100 beats per
minute during measurement, the monitor will display
the pulse value and “HI” symbol alternately.
Example: (58/HI)
If such an irregular rhythm occurs twice or more during
the same measurement, the display will show the pulse
value and the “IH” symbol alternately.
Example: (90 / IH)
Note: Please consult your doctor if an irregular heart
rhythm occurs often.
Irregular heartbeat
This unit has a unique feature that alerts the user if it detects an irregular heartbeat during
measurement.
Note: An irregular heartbeat is dened as a heartbeat rhythm that has a variation of more
than 25% from the average rhythm detected
during measurement.