Operation Manual

3
QUICK START GUIDE
Avoid smoking, eating or exercising for 30 minutes before
making a measurement.
1. Sit upright in a chair with your both feet on the oor.
2. Remove tight tting or thick clothing from you upper
arm.
3. Pull on the end of the cu until it wraps securely around
your upper arm. Place your arm on a table so that your
wrist is at the same level as your heart.
4. Press the “ ” button. The cu will automatically inate
and the measurement will start.
5. When the measurement is complete, the cu will
automatically deate and your systolic and diastolic
pressure values and pulse rate will be displayed.
DATE and TIME SETTINGS
- Set the correct date and time before making a measurement.
- Date and time should be reset after replacing batteries.
1. Press and hold the “ AVG” button for a few seconds until the “Year”
digit ashes.
2. Press the“sMEMO” or “PAGEt” buttons to select the current year.
3. Press the “ AVG” button to conrm the year setting.
4. Follow the same steps to set the month, day, hour and minute.
5. You can choose to have the clock function “ON” or “OFF”
while the monitor is not in use. Press “sMEMO” or
“PAGEt” button to select. Press the “ AVG” button to
conrm.
Note: If you select clock function “ON”, you should continue
to the “alarm setting” section. Otherwise, setting will not register.
ALARM SETTINGS
Note:
- You will not be able to set alarm if clock function is set to “OFF”.
- You can set a maximum of 4 alarm times.
6. To disable the alarm, press the ”sMEMO ” or “PAGEt” button to select “OFF” and press
the ” AVG” button to conrm.
7. To set 1st. alarm time, press the”sMEMO” or ” PAGEt” button and select “ON”. Press the
” AVG” button to conrm.
8. When the hour digit ashes, press the“sMEMO” or “PAGEt” button to select the hour.
Press the “ AVG” button to conrm.
9. When Minute digit ashes, press the“sMEMO” or “PAGEt” button to select the minute.
Press the “ AVG” button to conrm.
10. Follow the same steps to set the 2nd, 3rd, and 4th alarm.
Note:
- if an error occurs press the “ ” button at any time during
clock/ alarm setting to start again.
- Each alarm ringing lasts 45 seconds. You can turn it o by
pressing the “ ” button.