Instruction Manual

8
INSTALLATION
Install the stand as described below, or if you want to mount it to a wall, please contact a
professional installer. Please ensure the monitor is not plugged into the wall socket and
furthermore we recommend to get another person to assist in the following task.
Attaching the stand
Step 1
Insert the neck stand into the base with
the front of the neck facing left at a 45
degree angle and twist the neck stand
counter-clockwise until you hear a clear
sound and the neck stand is facing forward
aligned with the base.
Step 2
Lay the monitor flat on the surface and
stick the Neck Stand + Base assembly into
the back of the monitor. Secure the top of
the neck by screwing in 2 x screws.
CAUTION! Do not apply excessive force
as this may damage the screw holes.