Product Manual

8.1 Electrical Safety

Warning: The use of accessories other than those specied, with the exception

of accessories sold by Eko as replacement parts, may result in increased

emissions or decreased immunity of the Eko Electronic Stethoscope System.

Warning: The Eko Electronic Stethoscope System should not be used adjacent

to or stacked with other equipment. If adjacent or stacked use is necessary,

the Eko Electronic Stethoscope System should be observed to verify normal

operation in the conguration in which it will be used.

Guidance and Manufacturer’s Declaration - Electromagnetic Emission

The Eko Electronic Stethoscope System is intended for use in the

electromagnetic environment specied below. The user of the Eko

Electronic Stethoscope System should assure that it is used in such an

environment.

Applicable

Emissions Test

Compliance Electromagnetic Environment-

Guidance

RF emissions

CISPR 11

Group 1 The Eko Electronic Stethoscope

System uses RF energy only for

its internal function. Therefore,

its RF emissions are very low

and are not likely to cause any

interference in nearby electronic

equipment.

RF emissions

CISPR 11

Class B The Eko Electronic Stethoscope

System is suitable for use in

all establishments, including

domestic establishments and

those directly connected to

the public low-voltage power

supply network that supplies

buildings used for domestic

purposes.

Harmonic Emissions

IEC 6100-3-2

Not Applicable

Voltage uctuations/

icker emissions

IEC 61000-3-3

Not Applicable