Instructions

Specification
Bluetoooth ID Palm Speaker
Power Rating 3W
Transmitting Frequency 300HZ-20KHZ
THD <5%
S/N ≥80DB
Speaker Parameter 4Ω 3W diameter 36mm
Battery 3.7V/220mAh
Bluetoooth Version Bluetoooth 5.0+EDR
Charging the battery:
1. Insert the Micro USB port into the speaker and connect the
other end into a USB port.The LED indicator will turn red.
2. When the speaker is fully charged,the red
LED indicator will turn off.
Bluetooth pairing for music/phone call/camera remote
shutter:
1. Turn ON the speaker by pressing the power button(under
the speaker)for 3 seconds. The speaker will make a sound and
a blue
indicator light will flash.
2. Turn on your device and activate the Bluetooth function.
3. Search for the Bluetooth pairing name
"Palm Speaker"and click to pair. The speaker will make a sound
and the blue indicator light will keep flashing.
4. You can now play music and answer calls on your
smartphone,you will hear the sound through the speaker. You
can also use the power button to take photos.
5. Turn OFF the speaker by pressing the power button for 4
seconds,the speaker will make a sound. When