Technical information

Technical Information • SCS-TRUMPET • CPU Expansion Side Card

Technical Reference

Caution

Some of the connectors may provide operating voltage (e.g. +12V, +5V and +3.3V) to devices inside

the system chassis, such as internal peripherals. Not all of these connectors are overcurrent protected.

Do not use these connectors for powering devices external to the computer chassis. A fault in the load

presented by the external devices could cause damage to the board, the interconnecting cable and

the external devices themselves.

Please Note

The SCS-TRUMPET mezzanine module may be equipped with several on-board connectors for system

internal usage. Not all of these connectors may be present on a particular board. Be sure to specify

your individual needs when ordering the SCS-TRUMPET board. Characteristic features and the pin

assignments of each connector are described on the following pages (connector designation in

alphabetical order within the groups 'front panel connectors', 'on-board connectors', 'inter-board

connectors', and 'rear I/O connectors').